1/144 Pig Models Parseval - Sigsfeld German Drachen Observation Balloon Plastic Model Kit - PREORDER

This is a plastic model kit - Requires Glue and Paint.

1/48 ICM US OV10A & OV10D+ 1991 Desert Storm (2 kits) - PREORDER

On August 2, 1990, Iraq launched an invasion of Kuwait. In response, the multinational coalition’s forces developed and conducted an operation called “Desert Storm”. The start of the operation, which began on January 17, 1991, was a...

1/48 ICM Jig Dog JD-1D Invader With KDA-1 Drone - PREORDER

Plastic Model Kit

1/48 Trumpeter Chinese J-20 Mighty Dragon Beast Mode - PREORDER

The J-20 is a single-seat, twin-engine aircraft, bigger and heavier than the Sukhoi T-50 and the F-22. The J-20 has a canard delta layout (like Chengdu’s J-10) with two canted, all-moving vertical stabilizers (like the T-50) and smaller canted...

1/32 Trumpeter F-35C Lightning Plastic Model Kit - PREORDER

Model Brief  Length: 495mm Wingspan: 413.7mm Photo Etched Parts  1 piece Total Sprues:  15 sprues , lower fuselage , upper fuselage and tires More Features All New Tooling Detailed fuselage & wing w/accurate design Highly detailed...

1/72 ICM Tu-2T Soviet Torpedo Plane - PREORDER

The Tu-2T aircraft was a variant of the serial Tu-2 bomber, upgraded as a naval torpedo aircraft. This modification was developed and tested in the spring of 1945. It was equipped with special holders that allowed the use of two torpedoes type 45-36AN...

1/32 ICM Yak-9T WWII Soviet Fighter - PREORDER

The Yak-9T fighter was one of the modifications of the Yak-9 aircraft. Its main feature was an automatic gun NS-37 caliber 37 mm. The installation of this powerful weapon forced a number of improvements to the design of the base aircraft, in particular,...

1/32 ICM WWII British DH82A Tiger Moth Training Plane with Bombs - PREORDER

On summer 1940, the German invasion of Britain seemed almost inevitable. In these circumstances, the Ministry of Aviation developed an operation codenamed Banquet. Its purpose was to strengthen the RAF with training aircraft, which were to act as light...

1/72 Roden AJ-1 Savage Carrier Based Medium Bomber - PREORDER

At the end of World War II, wanting to equip their aircraft carrier strike forces with the new superpower weapon, the atomic bomb, the US Navy formulated a requirement for a new bomber that could take off directly from an aircraft carrier's deck,...

1/48 Amusing Hobby ME262 HG III WWII German Aircraft Plastic Model Kit

This model kit requires glue and paint.

1/48 Kinetic F-16C Block 25/42 USAF - PREORDER

1/48 Kinetic F-16A MLU Nato Viper - PREORDER

CMK Navigation lights red (all scale)

CMK Navigation lights green (all scale)

CMK Navigation lights clear (all scale)

CMK Navigation lights blue (all scale)

CMK Hexagonal bolt head 1.5 mm (60 pcs)

CMK Button - head rivet calibre 1.0 mm (60 pcs)

CMK Button - head rivet calibre 0.8 mm (60 pcs)

CMK Bolt with hexagonal head 2.0 mm (44 pcs)

CMK Bolt with hexagonal head 1.5 mm (60 pcs)

1/72 Planet Models XF-91 Thunderceptor Resin

1/72 CMK WWII IJAAF Fighter Aircraft External Fuel Tanks (2 pcs) Resin

Finely detailed resin cast drop fuel tanks, moulded in one piece each meaning no assembly is necessary, unlike the injected plastic ones made of several parts. The tanks can go with many Japanese Army AF fighter aircraft of the WW2 era, for instance...

1/72 CMK Westland Sea King HC.4 Cockpit set Resin

This set is an almost direct replacement of the kit’s rather simplified interior parts. The new resin cast interior offers substantially higher levels of detail in its new crew seats, rear cockpit bulkhead, central console and ceiling panel...

1/72 CMK Westland Sea King Engine Set for Airfix Resin

This set depicts the open engine section on the top of the helicopter. Included in this kit: an engine replica, new exhausts and cowling panels.

1/72 CMK Wellington Mk.II Wheels / for Airfix kit Resin

Main undercarriage wheels designed for the Airfix Wellington Mk.IA/C kits. The wheel tyres are weighed and offer much better detail overall.

1/72 CMK Wellington Mk.II Exhausts / for Airfix kit Resin

New resin cast Merlin engine exhausts with fine detail, to be used on the Airfix Wellington Mk.II models.

1/72 CMK Vampire Mk.I Underwing Slipper Tanks (2 pcs). for SH kit Resin

The early Vampire jet fighter aircraft could be fitted either with standard underwing fuel tanks on a pylon or with a ‘slipper’ type similar to those known from the Mosquito. The Special Hobby kit brings just the usual fuel tanks, now...

1/72 CMK Vampire Mk.5/9/T.11Mainwheels and Nosewheel for Special Hobby/Airfix kit Resin

The set consits of a nose wheel and mainwheels with the later style hubs. These wheels are designed to fit single seat Vampire models from Special Hobby and Extratech or two-seater training Vampires from Aifix. The nosewheel comes as a one piece...

1/72 CMK Vampire Mainwheels and Nosewheel. for Special Hobby kit Resin

This set brings all new wheels (two main and one nosewheel), the nosewheel comes as one part meaning it is not necessary to assemble it from two halves as the kit item. The tyres of the mainwheels are block tread style. Master pattern was 3D...

1/72 CMK Typhoon Mk.I – Exhausts for Airfix kit Resin

1/72 CMK Typhoon Mk.I – Engine set for Airfix kit Resin

1/72 CMK Tucano T.1 – Wheels Set / for Airfix kit Resin

This set brings completely new main undercarriage wheels. The master parts were created using 3D and produced on a 3D printer. The wheels offer much higher levels of detail than the original parts, tyres come with better tread pattern. Can be used...

1/72 CMK Tucano T.1 – Ejection Seats (Martin-Baker MB 8LC). 2 pcs for Airfix kit Resin

This set brings two nicely detailed Martin Baker MB 8LC ejection seats designed for an Airfix kit of the British Tucano T.1 aircraft. The seats are cast as one piece along with the pilots’ harness.

1/72 CMK Tucano T.1 – Correction Propeller and Spinner for Airfix kit Resin

This set contains a corrected four-bladed propeller for Airfix Short Tucano kit. The blades are separate items that are to be attached to our correctly shaped spinner.

1/72 CMK Sycomor - Chaff/Flare Dispenser for Mirage F.1 Resin

The Sycomor Dispenser pod saw service with Mirage F.1 export versions. It comes as a ready to use one-piece item, the pylon is an integral part of the dispenser.

1/72 CMK Supermarine Swift Ejection Seat (M.B. Mk.2) Resin

This ejection seat was used not just with the Swift, you can add it some other models too. Detailed resin cast of the seat comes with etches portraying seat belts and ejection handles. The latter is in two styles as seen in service, one as fitted in...

1/72 CMK Supermarine Swift Control Surfaces Resin

These resin control surfaces bring much nicer levels of detail including panel lines completely missing from the original kit items. And you can also pose the surfaces as deployed.

1/72 CMK Spitfire Mk.VC Wing Guns (two guns) / for Airfix kit Resin

Open cannon compatments and 20mm ammunition boxes for the new Mk.VC Spitfire as produced by Airfix. This set is designed for Spitfires with two 20mm cannon and 4 .303 machine guns.

1/72 CMK Spitfire Mk.VC Wing Guns (four guns) / for Airfix kit Resin

Open cannon compartments and 20mm ammunition boxes for the new Spitfire Mk VC from Airfix. This set is meant to be used with the 4x 20mm cannon variety.

1/72 CMK Spitfire Mk.VC Control Surfaces / for Airfix kit Resin

Flaps down, separate ailerons, separate elevators and rudder, this is the content of our Control Surfaces set.

1/72 CMK Spitfire Mk.VC Cockpit / for Airfix kit Resin

1/72 CMK SK-37 Viggen Cockpit Set Resin

For the new 1/72 Viggen kit, respectively for the SK-37 two seater version produced by Special Hobby / Tarangus, a complete cockpit set has been designed by CMK, with the new resin parts directly replacing the original styrene ones, no surgery is...

1/72 CMK Short Tucano T.1 – Cockpit set for Airfix kit Resin

Detailed set of the cockpit comes as a base resin part of the cockpit floor with side consoles. The additional parts offer the pilots´ seats, sidewalls, control columns, instrument panels and another items. To make the instrument panels more...

1/72 CMK Seafire FR.47 - Exhausts for SH Resin

1/72 CMK SB2C-4 Helldiver – Control Surfaces Set for Academy Resin

The set offers the modeller a new set of separate ailerons with nice and detailed skinning (in the original kit, the ailerons are integral with the wing) and also tail plane elevators and tail rudder with nicely depicted skinning. 3D designed,...

1/72 CMK SB2C Helldiver – Mainwheels Set for Academy. Cyber Hobby. Airfix Resin

The set offers new main undercarriage wheels with nicely detailed tread pattern and brake drums. To show the internal details and allow the hub covers to come with real-like openings, the covers are designed as separate parts. 3D designed and the...

1/72 CMK SAAB Viggen Wheels Resin

Superbly detailed, resin cast wheels, the tyres come with nice representation of the tread. 3D designed, direct replacement to somewhat simply-looking wheels in the kit. Fit any version of the Viggen.

1/72 CMK SAAB Viggen Thrust Reverser Resin

The Viggen thrust reverser petals feature higher level of details compared to the slightly simplified styrene items of the kit. The new ones have beed 3D designed and can be used with any version of the Viggen.

1/72 CMK SAAB Viggen Ram Air Turbine (RAT) Resin

This finely detailed resin cast replica of the Viggen’s retractable turbine directly replaces the original, slightly less detailed item in the kit. The set has been 3D designed and can be used with any version of the Viggen.

1/72 CMK SAAB Viggen Ejection Seat Resin

ne. 3D designed, can be fitted to any variety of the Viggen.

1/72 CMK SAAB Viggen Air Brake Set Resin

These resin cast air brakes offer better details compared to the original ones in the kit. They are 3D designed and you can use them to improve any version of the Viggen.