1/32 Trumpeter F-35C Lightning Plastic Model Kit - PREORDER

Model Brief  Length: 495mm Wingspan: 413.7mm Photo Etched Parts  1 piece Total Sprues:  15 sprues , lower fuselage , upper fuselage and tires More Features All New Tooling Detailed fuselage & wing w/accurate design Highly detailed...

1/32 ICM Yak-9T WWII Soviet Fighter - PREORDER

The Yak-9T fighter was one of the modifications of the Yak-9 aircraft. Its main feature was an automatic gun NS-37 caliber 37 mm. The installation of this powerful weapon forced a number of improvements to the design of the base aircraft, in particular,...

1/32 ICM WWII British DH82A Tiger Moth Training Plane with Bombs - PREORDER

On summer 1940, the German invasion of Britain seemed almost inevitable. In these circumstances, the Ministry of Aviation developed an operation codenamed Banquet. Its purpose was to strengthen the RAF with training aircraft, which were to act as light...

1/32 Planet Models Heinkel He 178 First Jet Plane Of World Resin

1/32 CMK Yak-3 – Wheels Set / for Special Hobby kit Resin

The set offers new and 3D-designed main undercarriage wheels and tailwheel.

1/32 CMK Yak-3 – RSI 4 Radio Receiver for Special Hobby Resin

The set brings the Soviet RSI 4 Radio Receiver that was used during the WW2 era for example in Yak-3 fighter airplanes.

1/32 CMK YAK-3 – Exhausts for Special Hobby kit Resin

The set brings all new exhausts made for Special Hobby kit. 3D designed and prototype parts 3D printed.

1/32 CMK WWII Bristol Centaurus Engine for Tempest Mk.II. for Special hobby kit Resin

The Bristol Centaurus sleeve valve engine was the pinnacle of the British radial engine development. Although it was designed during WW2, it saw service mainly in the immedate post-war period and powered such combat aeroplane as the Tempest Mk.II, Sea...

1/32 CMK Westland Whirlwind Mk.I Wheels Resin

Superbly detailed resin cast wheels which in fact are much better than those styrene ones in the Special Hobby‘s Westland Whirlwind Mk.I kit. The new wheels are weighed and unlike the styrene wheels, these come in one piece, so no glueing is...

1/32 CMK Westland Whirlwind Mk.I Gun Barrels Resin

These cannon barrels offer nice levels of detail and are a very easy replacement for the  styrene ones from the SH Whirlwind kit.

1/32 CMK Tempest/Typhoon - Tail wheel with strengthened leg for Special Hobby/Pacific Coast kits Resin

Realistically weighted and nicely detailed tail wheel with its leg, made to fit Typhoon and Tempest models. The leg itself is cast from special heat-hardened resin material to endure the weight of the model and not to get broken or bent. Tailored to...

1/32 CMK Tempest/Typhoon - Pilot´s seat with harness for Special Hobby/Pacific Coast kits Resin

1/32 CMK Tempest/Typhoon - Pilot´s seat for Special Hobby/Pacific Coast kits Resin

Nicely detailed pilot's seat made to enhance the detail levels of your Typhoon or Tempest models.

1/32 CMK Tempest Mk.V/VI - Exhausts set for Special Hobby kit Resin

Detailed resin exhausts tailored to fit the new Special Hobby kit. Their advantage over the kit exhausts is that they need not be assembled from halves and also provide more detail.

1/32 CMK Tempest Mk.V/Typhoon Mk.I - Main wheels early type for Special Hobby/Pacific Coast kits Resin

Nicely detailed wheels with weighted tyres for the Typhoon fighter and early series of the Tempest.

1/32 CMK Tempest Mk.V – Engine Cover Panels for Special Hobby kit Resin

The set contains cast resin parts of the engine and radiator cover panels for Special Hobby kits (SH32049, SH32052, SH32070). Could be also used to accompany our detail set no CMK 511 – open engine and radiator installation. 3D designed,...

1/32 CMK Tempest Mk.II/V/VI - Main wheels late type for Special Hobby/Pacific Coast kits Resin

Nicely detailed resin later type wheels with smooth tyres and realistically weighted appearance.

1/32 CMK Tempest Mk.II/V/VI - Early and late cannon barrels for Special Hobby/Pacific Coast kits Resin

Detailed cannon barrels resin cast parts depicting both types used with the Tempest. The long barrels fit only the Tempest Mk.V ser.1 aircraft while all the later aircraft were fitted with shorter barrels.

1/32 CMK Tempest Mk.II/V/VI - Control column for Special Hobby/Pacific Coast kits Resin

Detailed control column designed to enhance the look of your Tempest model interior. Besides resin parts the set comprises also a PE fret.

1/32 CMK Tempest Mk.II Bristol Centaurus engine (port side profile) Resin

A port side half of the Tempest’s Bristol Centaurus powerplant as used in the Mk.II version of the British fighter aeroplane. The installation in the kit is rather straightforward and despite the open port side engine panels, the profile of...

1/32 CMK Tempest Mk. II/V/VI- Square Tread Pattern Mainwheels for Special hobby kit Resin

This set brings the modeller new landing gear wheels with nicely detailed tread as used on post war Tempest fighter aircraft.

1/32 CMK Tempest Mk. II / V Series 2 / Mk.VI – Cannon Barrels With Wing Leading Edge Resin

This set contains wing leading edge sections with highly detailed Hispano Mk.V cannon barrels for the new 1/32 Special Hobby kit of the iconic British late war heavy fighter. AFFILIATION: UK/ WW II.

1/32 CMK Tempest - Main undercarriage strengthened legs for Special Hobby kit Resin

Nicely detailed resin cast undercarriage legs for Special Hobby Tempest kits. These legs are not only more detailed than the plastic ones, but being made from special heat-hardened resin material they also possess some extra rigidity.

1/32 CMK Tempest – Engine Set for Special Hobby kit Resin

This set contains extremely detailed resin replica of the Napier Sabre engine and its complete installation for Special Hobby Tempest kit. The resin parts portray the whole engine with no covering panels,even the lower half of the engine and also...

1/32 CMK Tempest - Armament set for starboard side wing for special Hobby kit Resin

Tempest starboard wing armament bay, open and detailed, with two Hispano Mk.V cannon and open ammunition magazines with 20mm rounds. The set is designed using 3D CAD and the master part made with a 3D printer. Along the detailed resin parts it offers...

1/32 CMK Spitfire Mk.Iia – Seat with harness Resin

1/32 CMK Spitfire Mk.IIA – Interior set Resin

1/32 CMK P-51D/K Seats for DRAG. Resin

1/32 CMK P-51D/K Rudder pedals for DRAG Resin

1/32 CMK P-51D Mustang Metal Drop Tank w/ jutting filler neck (2 pcs). for Revell kit Resin

Two metal-type drop tanks with jutting filler neck as seen fitted to the P-51D. The tank is a solid resin cast and the neck comes as separate part. You will not find this type of tank in the 1/32 Revell kit. Master pattern created using 3D.

1/32 CMK P-51D Mustang Main Undercarriage Strengthened legs. for Revell kit Resin

This set consists of new main undercarriage legs made of specially hardened resin material. The cast parts are heat treated in an oven which gives them a high degree of hardiness. What is more, the master pattern was created using 3D technology...

1/32 CMK P-51D Mustang – Wheels (Oval Tread Pattern). for Revell kit Resin

This set contains a pair of new mainwheels with oval tread pattern tyres.This type of tyres was used on the P-51D mainly in the ETO. The wheel hubs and brake details come as separate parts which makes the painting process easier for the modeller...

1/32 CMK P-51D Mustang – Wheels (Diamond and Hole Tread Pattern). for Revell kit Resin

This set contains a pair of new mainwheels with diamond and hole tread pattern tyres. The wheel hubs and brake details come as separate parts which makes the painting process easier for the modeller. The wheels are designed for the Revell P-51D kit...

1/32 CMK P-51D Mustang – Wheels (Cross Tread Pattern). for Revell kit Resin

This set contains a pair of new mainwheels with cross tread pattern tyres. The wheel hubs and brake details come as separate parts which makes the painting process easier for the modeller. The wheels are designed for the Revell P-51D kit and fit...

1/32 CMK P-51D Mustang – Tail Wheel with Strengthened leg. for Revell kit Resin

This set contains a brand new tail wheel leg made of specially hardened, oven-baked resin for extra strength. The wheel itself is of a standard type of resin. Both the leg and wheel have been 3D-designed and offer much higher levels of detail...

1/32 CMK P-51D Mustang – Seat with Belts + Armour Plate. for Revell kit Resin

This set consists of an all new pilot’s armour plate with nicely detailed head rest and also a new pilot’s seat, which has been moulded with the backpad and seat belts. Perfect for your new Revell P-51D kit.

1/32 CMK P-51D Mustang – Seat + Armour Plate. for Revell kit Resin

This set consists of an all new pilot’s armour plate with nicely detailed head rest and also a new pilot’s seat, which has been moulded with the backpad. Perfect for your new Revell P-51D kit.

1/32 CMK P-51D Mustang – Rudder Pedals Correction. for Revell kit Resin

This set consists of a pair of accurate and finely detailed rudder pedals which can be fitted to the 1/32 Revell P-51D kit. The pedals directly replace inaccurate kit parts and they also feature the manufacturer’s logo.

1/32 CMK P-51D Mustang – Radio set. for Revell kit Resin

Finely detailed radio set located behind the pilot’s seat and beneath the sliding canopy hood, designed to fit the new 1/32 Revell P-51D kit.

1/32 CMK P-51D Mustang – N-9 Gunsight. for Revell kit Resin

The P-51B/C and early batches of the P-51D were fitted with the N-9 gunsight unit. Now, CMK offer you a cast resin replica of this gunsight that feature very fine levels of detail. Although the gunsight was designed to fit the new Revell P-51D kit,...

1/32 CMK P-51D Mustang – K-14A Gunsight. for Revell kit Resin

The later P-51D blocks were equipped with the K-14A gunsight, which was also used in several other fighter planes such as the P-47, F-80, F-84 and F-86. Even some of the early P-51D machines got this gunsight installed in field. Nicely detailed cast...

1/32 CMK P-51D Mustang – Control Column Correction. for Revell kit Resin

This set contains a new, superbly detailed and accurately shaped control column, perfect for your new Revell P-51D kit.

1/32 CMK P-51D Control column (2 pcs) for HAS/DRAG. Resin

1/32 CMK P-51 Mustang-interior set for Drag. Resin

1/32 CMK P-40E/K/M/N Warhawk Armament set for HAS Resin

1/32 CMK P-40E and Later version Rudder pedals for HAS Resin

1/32 CMK P-40B - interior set for TRU Resin

1/32 CMK P-40 E/K/M/N Warhawk-undercar.bays with Canva Resin

1/32 CMK P-39D Airacobra armament set for SH Resin

1/32 CMK P-39 Airacobra Wheels (Special Hobby/Revell/Kitty Hawk kits) Resin

New and finely detailed resin wheels which make your Special Hobby and Revell kits (or even that from Kitty Hawk) P-39 Airacobra models look more life-like. The set offers two styles of the nose wheels and comes with photo-etched wheel hub covers.

1/32 CMK P-39 Airacobra undercarriage set for Sp.Hobby Resin

1/32 CMK P-39 Airacobra engine set for Sp.Hobby Kit Resin