1/72 Tamiya Mitsubishi A6M2B Zero Fighter Zeke Plastic Model Kit

This is a limited-edition model kit is of the the popular 1/72 scale A6M2b Zero fighter (nicknamed 'Zeke'). It has 3 original marking schemes combined with an additional 5 marking options, for a total of 8. These additional marking options were...

1/48 Tamiya P-38J Lightning Plastic Model Kit - PREORDER

Our legendary 1/48 Aircraft Series welcomes the J variant of the Lockheed P-38 Lightning! Our first P-38 kit, released in late 2019, came in the form of the F/G variant, and it quickly became the definitive P-38 kit of the modeling world.The Lockheed...

1/144 Roden Convair NB/XB-36H Crusader Plastic Model

In the early 1950s, a few years after the first successful use of nuclear weapons, there was real euphoria among the American scientific community. It was believed that in the near future, nuclear energy would displace all other ‘traditional’...

1/48 ICM B-26K Counter Invader (early) Plastic Model Kit

Before their appearance in Vietnam, the B-26K Counter Invader strike aircraft managed to fight in another part of the world – in the Congo. In the 1960s, this Central African country found itself in a state of civil war. The United States of...

1/32 ICM AH-1G Arctic Cobra Helicopter Model Kit

During the combat operations in Southeast Asia, the Cobras showed excellent survivability. They proved to be a reliable and powerful ground support aircraft, and after the end of combat operations the helicopters continued to be in service with the U.S...

1/144 Roden WWII Heinkel He111Z1 Zwilling Aircraft Plastic Model Kit

In 1940, a preliminary examination was made in Germany, of the means of a possible invasion of the British Isles, and prototypes of two giant transport gliders, the Me 321 and the Ju 322, were rapidly constructed. Judging by the initial plan, it was...

1/144 RC135V/W USAF Recon Aircraft Plastic Model Kit

In the late 1950s, due to a significant breakthrough in the field of compact electronics, it became possible to install various types of equipment to conduct electronic reconnaissance in the air. One of the most famous aircraft for this purpose, which...

1/72 Special Hobby Gloster Meteor Mk.8/9 Middle East Meteors

The Gloster Meteor was one of the world’s very first jet fighters. The first two versions of the Meteor were introduced into service with the RAF in time to see the deployment int he final stages of the war. The development of the type went on...

1/72 Special Hobby Messerschmitt Bf 109E-7 Trop Braving Sand and Snow

If you hear ‘Messerschmitt Bf 109’ it no doubt is a synonym for a fighter aeroplane. And what an aeroplane the one-oh-nine was. In active service from 1936 until 1954 in a number of countries, in front line duty since the Spanish Civil War...

1/72 Special Hobby Junkers Ju-87D-5 Axis Satellites

Academy’s  top quality styrene injected parts of their Junkers Ju 87G-2 kit has been joined now by Special Hobby’s own new conversion parts enabling the modeller to build the original kit in the D-5 variety. On top of that, we have...

1/72 Special Hobby Tachikawa Ki-54Otsu / Hickory Gunner Trainer

1/72 Special Hobby Short Sunderland Mk.I/II The Flying Porcupine

Our kit features one of the arguably most famous flying boats of the aviation history. The   The Sunderland is arguably one of the most famous and most well known flying boats in the history of aviation. Its initial version, the Mk.I was...

1/72 Special Hobby Vautour IIB French Jet Bomber

The Vautour was a French twin engined, jet multi purpose aircraft designed and manufactured in the post-war France. Besides the attack version (for the Israeli AF) and fighter version (for both the IAF and French AF), the bomber variety was also designed...

1/48 Special Hobby AJ-37 Viggen Strike Fighter

The SAAB 37 Viggen was an aircraft well ahead of its time. Unorthodox solutions chosen by its designers not only enabled the type to meet all the requirements, but to even surpass them in a couple of respects. The Swedish military ordered the jet in...

1/48 Special Hobby AH-1G Cobra Spanish & IDF/AF Cobras

The AH-1G Cobra was the very first helicopter primarily developed for anti ground missions. AH-1G Cobras saw their combat premiere in Vietnam in 1967. The early machines can be recognized by the tail with port-side mounted tail rotor, later ones had the...

1/96 Atlantis Models Boeing 727 Airliner Plastic Model Kit

Metaluna Monster Figure. The tooling is based on the Aurora Pattern, Aurora never came out with the kit. It was supposed to go into the Monsters of the Movies line. The Atlantis kit comes from all new tooling. Box art by Dave Cockrum in the classic 8.25...

1/72 Squadron Models Haunebu II German Flying Saucer UFO Model Kit - PREORDER

As early as 1942, an enlarged fighter version of the prototypes, Haunebu II, was built with a diameter of 26 meters and a crew of 9. This craft could reach supersonic speeds between 6,000 and 21,000 km/h! At the end of WWII, when Allied forces moved...

1/72 ICM The Ghost of Kyiv MIG-29 Ukrainian Air Force Plastic Model

1/35 Hobby Boss Fieseler Fi-156C-3/Trop Storch Airplane

In 1936, RLM issued requirements for liaison and artillery fire spotting aircraft for the Wehrmacht and Luftwaffe. This aircraft must have a Short Takeoff and Landing (STOL) performance. The Fi-156 entered small scale series production in 1937. When she...

1/48 Revell B-25J Mitchell Bomber Plastic Model

OverviewSkill Level: 4Scale: 1/48Wingspan: 16.75Length: 14.25 Parts: 138DescriptionOne of the most widely used twin-engine bombers employed during the war, the B-25 incorporated the use of 5 nose-mounted .50 cal. machine guns for a ground support...

1/48 Revell P51D Mustang Aircraft Plastic Model

1/24 Revell 1956 Ford Thunderbird with Removable Hardtop

1/72 Revell Top Gun Maverick F/A18 Super Hornet Aircraft (Snap Kit)

1/144 Academy F-16 A/C Fighting Falcon Plastic Model Kit

The F-16 is an American multirole jet fighter aircraft developed for the United States Air Force. Designed as a lightweight fighter, it evolved into a successful multirole aircraft. The F-16's versatility is a paramount reason it was a success on...

1/72 Flying Leathernecks USMC KC-130J Hercules / Harvest Hawk Decals

1/72 Flying Leathernecks Mk-83 1000lb bomb with conical fin (6 bombs)

This set includes six (6) Mk-83 1000lb bombs with conical fins and six (6) each of the following : M904 nose fuzes, Mk-43 TDD and MXU-735 Nose Plugs. The Mk-83 was the weapon of choice for the USN and USMC during Operation Desert Storm and was used...

1/72 Flying Leathernecks Mk-83 1000lb bomb with BSU-85 fin (6 bombs)

This set includes six (6) Mk-83 1000lb bombs with BSU-85 fins and six (6) each of the following : M904 nose fuzes, Mk-43 TDD and MXU-735 Nose Plugs. The Mk-83 was the weapon of choice for the USN and USMC during Operation Desert Storm and was used...

1/72 Flying Leathernecks Mk-82 500lb bomb with BSU-86 retarded fin thermally protected

This set contains six (6) Mk-82 500lb bombs with thermal protective coating and BSU-86 retarded fins. Also included are six (6) each of the following :  M904 Nose Fuze Mk-43 TDD MXU-735 Solid Nose Plug Bombs come as shown in the photo. Light...

1/72 Flying Leathernecks Mk-82 500lb bomb with BSU-86 retarded fin

This set contains six (6) Mk-82 500lb bombs with BSU-86 retarded fins. Also included are six (6) each of the following :  M904 Nose Fuze Mk-43 TDD MXU-735 Solid Nose Plug Bombs come as shown in the photo. Light sanding may be needed on the aft end...

1/72 Flying Leathernecks Mk-82 500lb bomb with BSU-33 fin

This set includes six Mk-82 / BLU-111/B bombs with BSU-33/B tail fins, and six each of the following : M904 nose fuzes, Mk-43 TDD, MXU-735 nose plugs. Accurately reproduced using personal measurements and photos of the real item. Parts come as seen in...

1/72 Flying Leathernecks Mk-77 Fire Bombs (6)

This set includes six (6) Mk-77 Fire Bombs. Light sanding to remove print support nibs is necessary on the aft end of the bomb

1/72 Flying Leathernecks Marine Aviation Combat Element Decals

This sheet features markings for eight different Marine Corps aircraft. KC-130F VMGRT-253 Titans - MCAS Cherry Point, NC 2006 F/A-18D VMFA(AW)-121 Green Knights - Operation Desert Storm 1990/1991 EA-6B VMAQ-1 Banshees - MCAS Cherry Point, NC 2011 AV-8B...

1/72 Flying Leathernecks LAU-7F/A Missile Launcher F/A-18C/D 2008 to present day (4)

Set of four (4) 3D printed launchers The LAU-7F/A was first introduced in 2008, with more widespread use by 2010. This version is used primarily on USMC F/A-18C/D aircraft.

1/72 Flying Leathernecks LAU-7A/A Missile Launcher for USAF F-4 Phantom (4)

Set of four (4) 3D printed launchers In February of 1964, the LAU-7A/A was introduced as a USAF version of the LAU-7/A that incorporated provisions for launching the TDU-11/B Target Rocket. The LAU-7A/A was used interchangeably with the Aero-3B on...

1/72 Flying Leathernecks LAU-7/A-6 Missile Launcher 1988 to present day (4)

Set of four (4) 3D printed launchers In January of 1987, AAC-829 was introduced and by May of 1988, over 6500 launchers had been modified to LAU-7/A-6. Over the course of the next several years, numerous AAC's changed the designation of the launcher...

1/72 Flying Leathernecks LAU-7/A-4 LAU-7/A-5 1976 to 1987 (4)

Set of four (4) 3D printed launchers In September of 1976, AAC 688 introduced a new dual Fin Retaining Clip for the new AIM-9L Sidewinder, creating the LAU-7/A-4. In June of 1980, AAC-736 was introduced and the launcher became the LAU-7/A-5. The...

1/72 Flying Leathernecks LAU-7/A-1 thru /A-3 Missile Launcher 1969 to 1975

Set of four (4) 3D printed launchers In May of 1969, AAC 545 introduced the Fin Retaining Clip for the AIM-9D/G/H Sidewinder, creating the LAU-7/A-1. In January of 1971, AAC-537-1 introduced the Detent Holdback Pin, creating the LAU-7/A-2. By 1972,...

1/72 Flying Leathernecks LAU-7/A Missile Launcher 1958 to 1968 (4)

Set of four (4) 3D printed launchers The LAU-7/A was developed in June of 1958 for use on the F4H-1 (F-4B) and designed to be used with the AIM-9B missile. This version was in service until May of 1969 when AAC-545 was introduced. 

1/72 Flying Leathernecks LAU-7 missile launcher stencil data Decals

Data Markings for twelve (12) LAU-7 missile launchers. Water slide decals printed my Microscale

1/72 Flying Leathernecks GBU-38 500lb JDAM (6)

Set includes six (6) Mk-82/BLU-111 bombs with KMU-572 tail assemblies and nose strakes attached. Also included are six (6) DSU-33 proximity fuzes, six (6) MXU-735 solid nose plugs and six (6) Ogive nose plugs.

1/72 Flying Leathernecks GBU-32(V)2/B 1000lb JDAM (6)

Set includes six (6) Mk-83/BLU-110 bombs with KMU-559 guidance kit and tail assemblies attached. Also included are six (6) each of the following : DSU-33 proximity fuzes, MXU-735 solid nose plugs and Ogive nose plugs.

1/72 Flying Leathernecks F-4E/G/S/J(UK) Belly Strap

Designed to be used with the Hasegawa kits, this is a simple to use and inexpensive way to replicate the strap applied to the bottom of the fuselage. Should also work with Fujimi and Revell Phantom kits.

1/72 Flying Leathernecks F-16C Fuselage plates for Revell/Tamiya/Hasegawa

Redesigned set includes the plates added to the upper wing and forward nose section. Parts adjusted to accurately fit all 1/72 F-16 kits.

1/72 Flying Leathernecks F/A-18C/D Pylons

Set FL172-2001 contains four correct SUU-63C/A wing pylons and one correct SUU-62C/A centerline pylon for the F/A-18A++, C and D. These pylons are correct for F/A-18C and D aircraft with BuNo's 163985 thru 165532 and aircraft upgraded to F/A-18A++...

1/72 Flying Leathernecks F/A-18A/B Pylons

Set FL172-2000 contains four correct SUU-63/A wing pylons and one correct SUU-62/A centerline pylon for the F/A-18A and B. They not only correct the shape of the kit pylons, they provide details unmatched by the kit supplied parts. All pylons are 3D...

1/72 Flying Leathernecks F/A-18A Tail plates for Academy

This item includes 2 sets of stiffening plates applied to the left side of each vertical tail on F/A-18A/A+ aircraft in use by the USN, USMC, Canada, Australia and Spain. Made of self adhesive vinyl, they will work with both Academy and Hasegawa 1/72...

1/72 Flying Leathernecks AH-1Z/UH-1Y FMV Tail Mod for Dream Model

The FMV Mod fitted to the tail boom of the AH-1Z and UH-1Y allows grounds units to see what the aircrew sees through the aircraft's FLIR. Designed for the Dream Model AH-1Z kit

1/72 Flying Leathernecks AH-1Z TSS Turret for Dream Model kit

This set includes six (6) Mk-83 1000lb bombs with BSU-85 fins and six (6) each of the following : M904 nose fuzes, Mk-43 TDD and MXU-735 Nose Plugs. The Mk-83 was the weapon of choice for the USN and USMC during Operation Desert Storm and was used...

1/48 Flying Leathernecks UH-34J, H-34G.III Canopy wheel mask for Italeri

1/48 Flying Leathernecks UH-34D canopy mask for Gallery

1/48 Flying Leathernecks UH-1Y SATCOM Antenna

This is a two piece 3D printed set of the SATCOM antenna mounted to the top of the main rotor mast on the UH-1Y Helicopter. Designed for the Kittyhawk kit. Simply glue the antenna to the top center of the base, paint and attach to your model. Parts come...

1/48 Flying Leathernecks UH-1Y Marine Skid Kid Yankees Decals

5.5 x 8.5 inch sheet and designed for the Kittyhawk 1/48 UH-1Y.  Features markings for 11 aircraft, including 3 from HMLA-267 while attached to the 11th MEU in 2019.  Printed by Microscale