1/32 ICM AH-1G Arctic Cobra Helicopter Model Kit

During the combat operations in Southeast Asia, the Cobras showed excellent survivability. They proved to be a reliable and powerful ground support aircraft, and after the end of combat operations the helicopters continued to be in service with the U.S...

1/32 Starfighter Decals PT-17 Kaydet Stearman USAAF Trainer

Designed to fit any 1/32 PT-17 Kaydet kit. Markings for 2 aircraft and data included.

1/32 Master Model PZL P11 Oil Cooler for IBG Kit

The set includes 3D printed resin part. For IBG model kit it requires cutting out the hole in the fuselage according the instruction

1/32 Squadron Crystal Clear Canopy - Messerschmitt Bf 109G/K (Hasegawa)

Messerschmitt Bf 109G/K ("Erla" canopy) for Hasegawa kit

1/32 Squadron Crystal Clear Canopy - A-10A Thunderbolt II (Trumpeter)

A-10A Thunderbolt II for Trumpeter kit

1/32 Squadron Crystal Clear Canopy - Hawker Typhoon (Revell)

Hawker Typhoon (bubble canopy) for Revell kit

1/32 Squadron Crystal Clear Canopy - Dewoitine D.520 (Azur)

Dewoitine D.520 for Azur kit

1/32 Squadron Crystal Clear Canopy - Messerschmitt Bf 109E-4 (Hasegawa)

Messerschmitt Bf 109E-4 for Hasegawa kit

1/32 Squadron Crystal Clear Canopy - MiG-15 (Trumpeter)

MiG-15 for Trumpeter kit

1/32 Squadron Crystal Clear Canopy - Grumman F6F-3 Hellcat (Hasegawa)

Grumman F6F-3 Hellcat for Hasegawa kit

1/32 Squadron Crystal Clear Canopy - Grumman F6F-5 Hellcat (Hasegawa)

Grumman F6F-5 Hellcat for Hasegawa kit

1/32 Squadron Crystal Clear Canopy - Republic P-47D Razorback Thunderbolt (Revell)

Republic P-47D "Razorback" Thunderbolt for Revell kit

1/32 Squadron Crystal Clear Canopy - Chance Vought F4U-1A/D Corsair (Revell)

Chance Vought F4U-1A/D Corsair for Revell kit

1/32 Squadron Crystal Clear Canopy - Curtiss P-40E Warhawk (Revell)

Curtiss P-40E Warhawk for Revell kit

1/32 Squadron Crystal Clear Canopy - North American P-51D Mustang (Hasegawa)

North American P-51D Mustang ("Dallas" canopy) for Hasegawa kit

1/32 Squadron Crystal Clear Canopy - North American P-51D Mustang (Hasegawa)

North American P-51D Mustang for Hasegawa kit

1/32 Flying Leathernecks TA-4J canopy wheel mask for Hasegawa

1/32 Flying Leathernecks RF-8A/G Canopy/wheel mask for Fisher conversion

Designed to be used with the Fisher Model and Pattern conversion for the Trumpeter F-8E.

1/32 Flying Leathernecks OA-4M canopy wheel mask for Hasegawa

1/32 Flying Leathernecks Mk-83 1000lb Bomb with Conical Fins (2)

This set includes two (2) Mk-83 1000lb bombs, two (2) Conical fins and two (2) each of the following : M904 nose fuzes, Mk-43 TDD and MXU-735 Nose Plugs. The Mk-83 was the weapon of choice for the USN and USMC during Operation Desert Storm and was used...

1/32 Flying Leathernecks Mk-83 1000lb Bomb with BSU-85 Fins

This set includes two (2) Mk-83 1000lb bombs, two (2) BSU-85 fins and two (2) each of the following : M904 nose fuzes, Mk-43 TDD and MXU-735 Nose Plugs. The Mk-83 was the weapon of choice for the USN and USMC during Operation Desert Storm and was used...

1/32 Flying Leathernecks Mk-83 / BLU-110A/B with Conical Fin - Thermally Protected

This set includes two (2) Mk-83 1000lb bombs with the Thermal Protective coating, two (2) Conical fins and two (2) each of the following : M904 nose fuzes, Mk-43 TDD and MXU-735 Nose Plugs. The Mk-83 was the weapon of choice for the USN and USMC during...

1/32 Flying Leathernecks Mk-83 / BLU-110A/B with BSU-85 Fin - Thermally Protected

This set includes two (2) Mk-83 1000lb bombs with the Thermal Protective coating, two (2) BSU-85 fins and two (2) each of the following : M904 nose fuzes, Mk-43 TDD and MXU-735 Nose Plugs. The Mk-83 was the weapon of choice for the USN and USMC during...

1/32 Flying Leathernecks Mk-82 with BSU-86 retarded fin

This set contains six (6) Mk-82 500lb bombs with BSU-86 retarded fins. Also included are six (6) each of the following : M904 Nose Fuze. Mk-43 TDD. MXU-735 Solid Nose Plug. Bombs come as shown in the photo. Light sanding may be needed on the aft end of...

1/32 Flying Leathernecks Mk-82 thermally protected with BSU-86 retarded fin

This set contains six (6) thermally protected Mk-82 500lb bombs with BSU-86 retarded fins. Also included are six (6) each of the following: M904 Nose Fuze. Mk-43 TDD. MXU-735 Solid Nose Plug. Bombs come as shown in the photo. Light sanding may be needed...

1/32 Flying Leathernecks Mk-82 / BLU-111A/B with BSU-33 Fin - Thermally Protected

This set includes six Mk-82/BLU-111 bomb bodies with the thermal protective coating, six BSU-33 tail fins, and six each of the following : M904 nose fuzes, Mk-43 TDD, MXU-735 nose plugs. Accurately reproduced using personal measurements and photos of the...

1/32 Flying Leathernecks Mk-82 / BLU-111/B with BSU-33 Fin

1/32 Flying Leathernecks Mk-77 Fire Bombs (2) with stencil decals from AOA

Each set will include two fire bombs along with the stencils provided by AOA. Some minor clean up of the forward end of the bomb will be required to remove the print support nibs. A few swipes with a file and sanding sticks does the trick. Set contains...

1/32 Flying Leathernecks Mk-76 25lb Practice Bombs

Mk-76 practice bombs (6 per pack). These new 3D printed bombs come ready to paint and install. Some very light clean up may be necessary at the aft end of the fins to remove any trace of the printing supports. Simply paint FS35109 Blue and install!

1/32 Flying Leathernecks Mk.84 GBU-31 JDAM mask for Tamiya F-15E / F-16CJ

Designed to fit the GBU-31 with Mk-84 warhead included in both the Tamiya F-16CJ and F-15E 'Bunker Buster' kits.  

1/32 Flying Leathernecks Mk.84 GBU-31 JDAM mask for Academy F-16

This masking set is designed specifically for the 2000lb GBU-31 JDAM's provided in the Academy 1/32 F-16 kits. There are two sets of masks, along with detailed instructions included. A quick and easy way to complete these bombs and get them loaded on...

1/32 Flying Leathernecks Mk.84 GBU-31 JDAM mask for Academy F/A-18

This masking set is designed specifically for the 2000lb GBU-31 JDAM's provided in the Academy 1/32 F/A-18 kits. There are two sets of masks, along with detailed instructions included. A quick and easy way to complete these bombs and get them loaded on...

1/32 Flying Leathernecks LGTR (Laser Guided Training Round)

1/32 Flying Leathernecks LAU-7F/A Missile Launcher F/A-18C/D 2008 to present day (4)

Set of four (4) 3D printed launchers. The LAU-7F/A was first introduced in 2008, with more widespread use by 2010. This version is used primarily on USMC F/A-18C/D aircraft.

1/32 Flying Leathernecks LAU-7A/A Missile Launcher for USAF F-4 Phantom (4)

Set of four (4) 3D printed launchers In February of 1964, the LAU-7A/A was introduced as a USAF version of the LAU-7/A that incorporated provisions for launching the TDU-11/B Target Rocket. The LAU-7A/A was used interchangeably with the Aero-3B on USAF...

1/32 Flying Leathernecks LAU-7/A-6 Missile Launcher 1988 to present day (4)

Set of four (4) 3D printed launchers In January of 1987, AAC-829 was introduced and by May of 1988, over 6500 launchers had been modified to LAU-7/A-6. Over the course of the next several years, numerous AAC's changed the designation of the launcher to...

1/32 Flying Leathernecks LAU-7/A-4 LAU-7/A-5 1976 to 1987 (4)

Set of four (4) 3D printed launchers. In September of 1976, AAC 688 introduced a new dual Fin Retaining Clip for the new AIM-9L Sidewinder, creating the LAU-7/A-4. In June of 1980, AAC-736 was introduced and the launcher became the LAU-7/A-5. The...

1/32 Flying Leathernecks LAU-7/A-1 thru /A-3 Missile Launcher 1969 to 1975

Set of four (4) 3D printed launchers. In May of 1969, AAC 545 introduced the Fin Retaining Clip for the AIM-9D/G/H Sidewinder, creating the LAU-7/A-1. In January of 1971, AAC-537-1 introduced the Detent Holdback Pin, creating the LAU-7/A-2. By 1972, the...

1/32 Flying Leathernecks LAU-7/A Missile Launcher 1958 to 1968 (4)

Set of four (4) 3D printed launchers. The LAU-7/A was developed in June of 1958 for use on the F4H-1 (F-4B) and designed to be used with the AIM-9B missile. This version was in service until May of 1969 when AAC-545 was introduced.

1/32 Flying Leathernecks LAU-68F/A APKWS Pod (empty)

This set includes two empty LAU-68F/A pods. The F/A is 11 inches longer than the LAU-68D/A and is used exclusively with the 2.75 APKWS rockets. Pod is used by the F/A-18, AV-8B, AH-1Z, UH-1Y, A-10, F-16 and a number of other aircraft. Pods are 3D printed...

1/32 Flying Leathernecks LAU-115C/A Launcher (F/A-18 AIM-7, Dual AIM-9/120)

1/32 Flying Leathernecks LAU-115/A Launcher (F/A-18 AIM-7, Dual AIM-9/120)

1/32 Flying Leathernecks GBU-38 500lb JDAM - Thermally Protected

Set includes two Mk-82/BLU-111 bombs with rough ablative coating, two KMU-572 kits, which include the tail assemblies and  nose strake as separate pieces. Also included are two (2) DSU-33 proximity fuzes, two (2) MXU-735 solid nose plugs...

1/32 Flying Leathernecks GBU-38 500lb JDAM

Set includes two slick Mk-82/BLU-111 bombs, two KMU-572 kits, which include the tail assemblies and  nose strake as separate pieces. Also included are two (2) DSU-33 proximity fuzes, two (2) MXU-735 solid nose plugs and two (2) Ogive nose...

1/32 Flying Leathernecks GBU-32 JDAM mask for Wolfpack Design

Designed to be used with the resin GBU-32 1000lb JDAM.

1/32 Flying Leathernecks GBU-32 1000lb JDAM - Thermally Protected

Set includes two Thermally Protected Mk-83 / BLU-110A/B bombs with KMU-559 guidance kit attached and the tail assemblies as separate pieces. Also included are two (2) DSU-33 proximity fuzes, two (2) MXU-735 solid nose plugs and two (2) Ogive nose plugs.

1/32 Flying Leathernecks GBU-32 1000lb JDAM

Set includes two Mk-83/BLU-110 bombs with KMU-559 guidance kit attached and the tail assemblies as separate pieces. Also included are two (2) DSU-33 proximity fuzes, two (2) MXU-735 solid nose plugs and two (2) Ogive nose plugs.

1/32 Flying Leathernecks F-8E/J canopy wheel mask for Trumpeter

1/32 Flying Leathernecks F-8C Canopy/wheel mask for Fisher conversion

Designed for the Fisher Model and Pattern F-8C conversion for the Trumpeter F-8E.

1/32 Flying Leathernecks F-5F canopy/wheel mask for Kittyhawk

1/32 Flying Leathernecks F-5E canopy/wheel mask for Kittyhawk

1/32 Flying Leathernecks F-5E canopy/wheel mask for Hasegawa