1/48 Academy PV-1 Solomon Islands Theatre USN

USN WWII medium, twin-engine bomber/patrol aircraft.Detailed cockpit, well defined panel linesBuild with bomb bay doors open or closedThree U.S. Navy markings PV-1 "Blonde Blitz" of unknown unit, Russel Island, Solomon, Mid 1943 PV-1 "Scooters Dream" of...

1/48 ICM US OV10A & OV10D+ 1991 Desert Storm (2 kits) - PREORDER

On August 2, 1990, Iraq launched an invasion of Kuwait. In response, the multinational coalition’s forces developed and conducted an operation called “Desert Storm”. The start of the operation, which began on January 17, 1991, was a...

1/48 ICM Jig Dog JD-1D Invader With KDA-1 Drone - PREORDER

Plastic Model Kit

1/48 Trumpeter Chinese J-20 Mighty Dragon Beast Mode - PREORDER

The J-20 is a single-seat, twin-engine aircraft, bigger and heavier than the Sukhoi T-50 and the F-22. The J-20 has a canard delta layout (like Chengdu’s J-10) with two canted, all-moving vertical stabilizers (like the T-50) and smaller canted...

1/48 Amusing Hobby ME262 HG III WWII German Aircraft Plastic Model Kit

This model kit requires glue and paint.

1/48 Kinetic F-16C Block 25/42 USAF - PREORDER

1/48 Kinetic F-16A MLU Nato Viper - PREORDER

1/48 Planet Models Caproni Ca.114 Peruvian AF Fighter Resin

1/48 CMK Wywern S.4 - wheels for Trump. Resin

1/48 CMK WWII Luftwaffe 900L Drop Tank (2 pc) Resin

1/48 CMK WWII Drop tanks 600l Luftwaffe (for Ju 88/He Resin

1/48 CMK WW II.US Fuel Trailer Type A-3(600 gal.)full Resin

1/48 CMK Tornado IDS Undercarriage set for Revell Resin

1/48 CMK Tornado IDS Air Brakes Resin

1/48 CMK Tornado IDS – Interior set Resin

1/48 CMK Tempest Napier Sabre engine (upper half) Resin

A special set for those wishing to build the Eduard’s Tempest with its engine visible and yet retain the type’s distinctive feature which was the bulky chin radiator. The set offers superbly detailed upper half replica of the Napier...

1/48 CMK Tempest Fuselage Fuel and Oil Tanks Resin

This set is a follow-up to the Sabre engine (upper half) set (4393) which obviously can be used individually too. The set brings the oil and fuel tanks and bulkheads located in the upper fuselage in front of the pilot’s cockpit.

1/48 CMK Tempest Bomb Racks & 500 Lb Bombs Resin

Neither Special Hobby/Eduard Mk.II Tempest nor Eduard’s Mk.V Tempest contain the bombs and their racks. Our set does, though! These bombs are of the 500lb variety and come with the appropriate racks.

1/48 CMK Tempest Bomb Racks & 1000 Lb Bombs Resin

Neither Special Hobby/Eduard Mk.II Tempest nor Eduard’s Mk.V Tempest contain the bombs and their racks. Our set does, though! These bombs are of the 1000lb variety and come with the appropriate racks.

1/48 CMK Spitfire Mk.XIV Bubble Canopy Cockpit Resin

This resin set directly replaces all the styrene interior parts of Airfix’s Spitfire Mk.XIV kit. Besides the resin item, you will get also a fret of photo etches.

1/48 CMK Spitfire Mk.I/II/V wheels 5 poked disc Resin

1/48 CMK Spitfire Mk.I - interior set for Airfix Resin

1/48 CMK Spitfire Mk.I - Control Surfaces for Airfix Resin

This control surfaces set offers separate ailerons, elevators (the tailplane is to be used from the kit) and a rudder. The cast parts feature very fine inspection panels and engraved lines.

1/48 CMK Spitfire Mk. Vb – Armament set Resin

1/48 CMK Spifire Mk.I - Armament set Resin

The iconic Spitfire Mk.I was armed with eight Browning .303 machine guns. This highly detailed set offers the modeller to portray his Spitfire model with all armament compartments open and the detailed MGs well visible.

1/48 CMK Siebel Si 204/Aero C-3 Wheels Resin

Main undercarriage wheels and the tailwheel finely cast in resin bring much higher levels of detail to the genuine star of our 2019 range, the 1/48 Siebel Si 204D. Can be used with the upcoming Czech and French versions of the Siebel as well.

1/48 CMK Siebel Si 204/Aero C-3 Prop Spinners Resin

The CMK resin cast propeller spinners with nicer details than the styrene parts could offer.

1/48 CMK Siebel Si 204/Aero C-3 Pilots Seats Resin

Comparing with the original styrene items, the seats in this set boast much more details and come with photo-etched belts too.

1/48 CMK Siebel Si 204/Aero C-3 Engine Resin

Following some more straightforward and easy-to-build-in sets and a couple of figures, we now have prepared a bit more complex set for 1/48 Siebel Si 204 / Aero C-3 family kits which portrays the complete engine installation. The set consists of an...

1/48 CMK Sea Vixen – Wheels Set for Airfix kit Resin

This set brings a new nose wheel and a pair of mainwheels with finely detailed tread pattern, hub caps and brakes. The original kit parts lack many of the detail as well as the brakes (the same for the resin wheels produced by the competition). 3D...

1/48 CMK SE.5a – Correction Wheels Set for Eduard/Roden kits Resin

Detailed resin wheels with the manufacturer´s name on the tyres and accurate fabric detail on the wire spokes. Made to fit both the new Eduard beauty and the earlier Roden or Monogram kits.

1/48 CMK SAAB 37 Viggen Wheels Resin

1/48 CMK SAAB 37 Viggen Thrust Reverser Resin

Detailed, cast resin thrust reverser plates that replace the original kit plastic parts. The thrust reverser is a striking component of the Viggen fighter and it helps to the plane´s excellent landing capabilities.

1/48 CMK SAAB 37 Viggen Ejection Seat Resin

Highly detailed ejector seat for all versions of the Swedish SAAB 37 fighter plane. The seat comes with a whole set of seat belts and it also contains a photo etched leg restraints.

1/48 CMK SAAB 37 Viggen Air Brake Set Resin

Resin Parts

1/48 CMK RF-84F Thunderflash – Correction Wing Flaps / for Tanmodel kit Resin

Besides the incorrect Bundesluftwaffe hot seat type, there are several other mistakes in the Tanmodel RF-84F kit. One of such parts are the short landing flaps. In our set we bring you all new landing flaps with correct dimensions.

1/48 CMK RF-84F Thunderflash – Correction Martin Baker GY5/GT5 Seat with Harness / for Tanmodel kit Resin

One of the F-84F Thunderstreak/RF-84F Thunderflash jet aircraft users was also the German Bundesluftwaffe that equipped its machines with new MB GY5/GT5 ejection seats. Unfortunately, in the Tanmodel kit, this type of the hot seat was left out. Now...

1/48 CMK RF-84F Thunderflash – Camera Set / for Tanmodel kit Resin

The set offers all-new and superbly-detailed camera equipment for a widely used recce version of the F-84F Thunderflash jet aircraft. Not only are the cameras much more detailed, they also come as one-piece parts. The maintenance panels of the recce...

1/48 CMK Remove Before Flight Tags (20pcs) Resin

1/48 CMK Reggiane Re 2005 Tailwheel with Strengthened Leg Resin

This set is designed for the Special Hobby’s Re 2005 kit and offers new tailwheel and its leg which is cast from special, heat-treated (hardened) resin. The wheel is made from standard material  and offers higher levels of detail compared to...

1/48 CMK Reggiane Re 2005 Supercharger Air Intake Resin

The Fiat RA.1050 RC-58 (DB 605) powerplant installed in the Reggiane Re.2005 airframes had a characteristic feature, its supercharger air intake mounted on the port side fuselage. In the kit, this part has to be modelled using two halves, now you...

1/48 CMK Reggiane Re 2005 Main Wheels Resin

The 1/48 scale  Reggiane Re 2005 was released this February and  now we have a couple of detail sets plus a canopy pre-cut masks to make your modelling experience more enjoyable. This newsletter sees two of the sets, namely the cast wheels...

1/48 CMK Reggiane Re 2005 Exhausts Resin

Special Hobby’s Re 2005 kit will benefit from the addition of this set which brings new exhausts and the manifold fairing strips. Details are nicer that on the original styrene items 

1/48 CMK Reggiane Re 2000 Tailwheel with Strengthened Leg Resin

Finely detailed tailwheel and its leg made of special, oven baked and hardened resin. Designed for Special Hobby Re 2000 releases. special heat treated, tough resin leg and tail for Special Hobby kits (SH48204, SH48208 and any future re-releases)

1/48 CMK Reggiane Re 2000 Headrest Resin

In case of an accident and the machine turning over, the head of its pilot was protected by a headrest mounted on a special pyramid-shaped structure. The resin item in this set offers higher detail levels compared to the styrene part provided in the kit...

1/48 CMK Reggiane Re 2000 Exhausts Resin

These resin exhausts offer finer details compared to the original styrene ones. Easy to replace item, made for any release of Special Hobby’s Reggiane Re 2000   detail exhausts replace the original styrene parts made for Special Hobby...

1/48 CMK Palouste Mk.101/102 – Jet Air Starter Trolleys and Airborne Pod Resin

The Palouste starter was used for starting up aircraft jet engines by means of high pressure and high velocity air generated by a small turbine located inside the trolley pod. The turbine was housed inside a unique-shaped pod resembling a drop fuel tank...

1/48 CMK P-51D Mustang - Wheels (Oval Tread Pattern) Resin

1/48 CMK P-51D Mustang - Wheels (Diamond and Hole Trea Resin

The set contains all new mainwheels with Diamond and Hole Tread Pattern.

1/48 CMK P-51D Mustang - Wheels (Cross Tread Pattern) Resin

1/48 CMK P-39 Airacobra Wheels Resin

Detail resin wheels to make your Hasegawa or Eduard P-39 Airacobra model much better looking. The set contains two styles of the nose wheel and comes with etched wheel hubs.

1/48 CMK N1K2-J Shiden Kai (George) - Undercarriage set Resin

This undercarriage detail set fits the new Hasegawa kit of the arguably top fighter aircraft of the WW2 Japanese Navy. Contains not only the wheel wells, but new undercarriage doors too.