1/72 ICM Tu-2T Soviet Torpedo Plane - PREORDER

The Tu-2T aircraft was a variant of the serial Tu-2 bomber, upgraded as a naval torpedo aircraft. This modification was developed and tested in the spring of 1945. It was equipped with special holders that allowed the use of two torpedoes type 45-36AN...

1/72 Roden AJ-1 Savage Carrier Based Medium Bomber - PREORDER

At the end of World War II, wanting to equip their aircraft carrier strike forces with the new superpower weapon, the atomic bomb, the US Navy formulated a requirement for a new bomber that could take off directly from an aircraft carrier's deck,...

1/72 Planet Models XF-91 Thunderceptor Resin

1/72 CMK WWII IJAAF Fighter Aircraft External Fuel Tanks (2 pcs) Resin

Finely detailed resin cast drop fuel tanks, moulded in one piece each meaning no assembly is necessary, unlike the injected plastic ones made of several parts. The tanks can go with many Japanese Army AF fighter aircraft of the WW2 era, for instance...

1/72 CMK Westland Sea King HC.4 Cockpit set Resin

This set is an almost direct replacement of the kit’s rather simplified interior parts. The new resin cast interior offers substantially higher levels of detail in its new crew seats, rear cockpit bulkhead, central console and ceiling panel...

1/72 CMK Westland Sea King Engine Set for Airfix Resin

This set depicts the open engine section on the top of the helicopter. Included in this kit: an engine replica, new exhausts and cowling panels.

1/72 CMK Wellington Mk.II Wheels / for Airfix kit Resin

Main undercarriage wheels designed for the Airfix Wellington Mk.IA/C kits. The wheel tyres are weighed and offer much better detail overall.

1/72 CMK Wellington Mk.II Exhausts / for Airfix kit Resin

New resin cast Merlin engine exhausts with fine detail, to be used on the Airfix Wellington Mk.II models.

1/72 CMK Vampire Mk.I Underwing Slipper Tanks (2 pcs). for SH kit Resin

The early Vampire jet fighter aircraft could be fitted either with standard underwing fuel tanks on a pylon or with a ‘slipper’ type similar to those known from the Mosquito. The Special Hobby kit brings just the usual fuel tanks, now...

1/72 CMK Vampire Mk.5/9/T.11Mainwheels and Nosewheel for Special Hobby/Airfix kit Resin

The set consits of a nose wheel and mainwheels with the later style hubs. These wheels are designed to fit single seat Vampire models from Special Hobby and Extratech or two-seater training Vampires from Aifix. The nosewheel comes as a one piece...

1/72 CMK Vampire Mainwheels and Nosewheel. for Special Hobby kit Resin

This set brings all new wheels (two main and one nosewheel), the nosewheel comes as one part meaning it is not necessary to assemble it from two halves as the kit item. The tyres of the mainwheels are block tread style. Master pattern was 3D...

1/72 CMK Typhoon Mk.I – Exhausts for Airfix kit Resin

1/72 CMK Typhoon Mk.I – Engine set for Airfix kit Resin

1/72 CMK Tucano T.1 – Wheels Set / for Airfix kit Resin

This set brings completely new main undercarriage wheels. The master parts were created using 3D and produced on a 3D printer. The wheels offer much higher levels of detail than the original parts, tyres come with better tread pattern. Can be used...

1/72 CMK Tucano T.1 – Ejection Seats (Martin-Baker MB 8LC). 2 pcs for Airfix kit Resin

This set brings two nicely detailed Martin Baker MB 8LC ejection seats designed for an Airfix kit of the British Tucano T.1 aircraft. The seats are cast as one piece along with the pilots’ harness.

1/72 CMK Tucano T.1 – Correction Propeller and Spinner for Airfix kit Resin

This set contains a corrected four-bladed propeller for Airfix Short Tucano kit. The blades are separate items that are to be attached to our correctly shaped spinner.

1/72 CMK Sycomor - Chaff/Flare Dispenser for Mirage F.1 Resin

The Sycomor Dispenser pod saw service with Mirage F.1 export versions. It comes as a ready to use one-piece item, the pylon is an integral part of the dispenser.

1/72 CMK Supermarine Swift Ejection Seat (M.B. Mk.2) Resin

This ejection seat was used not just with the Swift, you can add it some other models too. Detailed resin cast of the seat comes with etches portraying seat belts and ejection handles. The latter is in two styles as seen in service, one as fitted in...

1/72 CMK Supermarine Swift Control Surfaces Resin

These resin control surfaces bring much nicer levels of detail including panel lines completely missing from the original kit items. And you can also pose the surfaces as deployed.

1/72 CMK Spitfire Mk.VC Wing Guns (two guns) / for Airfix kit Resin

Open cannon compatments and 20mm ammunition boxes for the new Mk.VC Spitfire as produced by Airfix. This set is designed for Spitfires with two 20mm cannon and 4 .303 machine guns.

1/72 CMK Spitfire Mk.VC Wing Guns (four guns) / for Airfix kit Resin

Open cannon compartments and 20mm ammunition boxes for the new Spitfire Mk VC from Airfix. This set is meant to be used with the 4x 20mm cannon variety.

1/72 CMK Spitfire Mk.VC Control Surfaces / for Airfix kit Resin

Flaps down, separate ailerons, separate elevators and rudder, this is the content of our Control Surfaces set.

1/72 CMK Spitfire Mk.VC Cockpit / for Airfix kit Resin

1/72 CMK SK-37 Viggen Cockpit Set Resin

For the new 1/72 Viggen kit, respectively for the SK-37 two seater version produced by Special Hobby / Tarangus, a complete cockpit set has been designed by CMK, with the new resin parts directly replacing the original styrene ones, no surgery is...

1/72 CMK Short Tucano T.1 – Cockpit set for Airfix kit Resin

Detailed set of the cockpit comes as a base resin part of the cockpit floor with side consoles. The additional parts offer the pilots´ seats, sidewalls, control columns, instrument panels and another items. To make the instrument panels more...

1/72 CMK Seafire FR.47 - Exhausts for SH Resin

1/72 CMK SB2C-4 Helldiver – Control Surfaces Set for Academy Resin

The set offers the modeller a new set of separate ailerons with nice and detailed skinning (in the original kit, the ailerons are integral with the wing) and also tail plane elevators and tail rudder with nicely depicted skinning. 3D designed,...

1/72 CMK SB2C Helldiver – Mainwheels Set for Academy. Cyber Hobby. Airfix Resin

The set offers new main undercarriage wheels with nicely detailed tread pattern and brake drums. To show the internal details and allow the hub covers to come with real-like openings, the covers are designed as separate parts. 3D designed and the...

1/72 CMK SAAB Viggen Wheels Resin

Superbly detailed, resin cast wheels, the tyres come with nice representation of the tread. 3D designed, direct replacement to somewhat simply-looking wheels in the kit. Fit any version of the Viggen.

1/72 CMK SAAB Viggen Thrust Reverser Resin

The Viggen thrust reverser petals feature higher level of details compared to the slightly simplified styrene items of the kit. The new ones have beed 3D designed and can be used with any version of the Viggen.

1/72 CMK SAAB Viggen Ram Air Turbine (RAT) Resin

This finely detailed resin cast replica of the Viggen’s retractable turbine directly replaces the original, slightly less detailed item in the kit. The set has been 3D designed and can be used with any version of the Viggen.

1/72 CMK SAAB Viggen Ejection Seat Resin

ne. 3D designed, can be fitted to any variety of the Viggen.

1/72 CMK SAAB Viggen Air Brake Set Resin

These resin cast air brakes offer better details compared to the original ones in the kit. They are 3D designed and you can use them to improve any version of the Viggen.  

1/72 CMK S.O.4050 Vautour - External tanks for Special hobby and Azur kits Resin

The set offers the modeller two underwing fuel tanks cast together with the pylons and stabilizing fins. They will fit any kit of the French Vautour post-war jet aircraft in this scale.

1/72 CMK Remove Before Flight Tags (20 pc) Resin

1/72 CMK Remora - Radar Jammer Pod for Mirage F.1 and Mirage 2000 Resin

The Remora is a French electronic countermeasure pod mainly used with the Mirage F.1 and Mirage 2000. Our resin rendition is cast one-piece with its pylon, two side antennae are separate items.

1/72 CMK Reggiane Re 2005 Main Wheels Resin

The pair of nicely detailed main wheels as offered in this set is designed for the Sword kit and was simply adapted from the wheels Q48364 originally made for our own kit. They can be used with models of other manufacturers, too. Detail wheels for...

1/72 CMK Phantom FG.1 Cockpit Correction Resin

This set completely replaces the original parts of the kit, which do lack many of the detail and essential components. The resin replacement items bring substantially more detail and are more complex, too. A fret of photo etches is also supplied...

1/72 CMK Panther Ausf.G Engine cooler(right side) for Resin

1/72 CMK Palouste Mk.101/102 – Jet Air Starter Trolley and Airborne Pod Resin

The Palouste starter was used for starting up the aircraft jet engines by means of high pressure and high velocity air generated by a small turbine located inside the trolley or pod. The turbine was housed inside a unique-shaped pod resembling a...

1/72 CMK P-47D/M Thunderbolt - Wheels (Diamond Tread Pattern) set for any P47D/M Resin

Exquisitely detailed resin main undercarriage wheels with diamond tread and separate hubs, prepared for any kit of this famous WW2 American fighter plane.

1/72 CMK P-47D/M Thunderbolt - 200 US gal. External Drop Tank (2pcs) set for any P47D/M Thunderbolt kit Resin

The set comprises two flat-shaped 200 US gal external fuel tanks and their attachment lugs. These tanks were usually used in pairs under the wings of the P-47, fitted to B-10 shackles that were typical for this tank installation. It was also...

1/72 CMK P-40N-5 through N-40 Seat with Belts for Special Hobby Resin

For the new Special Hobby P-40N kits (later blocks), but not just for these kits, has been designed this set which brings the modeller a new cast pilot’s seat with belts. 3D designed, the seat master pattern was produced using a 3D printer...

1/72 CMK P-40N-5 through N-40 Seat for Special Hobby kits Resin

The later blocks of the P-40N fighters from Special Hobby, but also any other kit of this version will no doubt enhance their look by the addition of this new seat. No seat belts, 3D designed, master parts produced using a 3D printer.

1/72 CMK P-40N Engine Set. for Special Hobby kit Resin

This detailed open engine compartment set has been designed to fit the new 1/72 Special Hobby P-40N kit. The set contains also the cowling panels.

1/72 CMK P-40K/M/N Warhawk Late Type Fishtail Exhausts Resin

Finely detailed resin exhauts stubs for late P-40 versions. Come pre-drilled and offer more details than the styrene exhausts.

1/72 CMK P-40E-N Control Columns (3 pcs.). for Special Hobby. Academy. Hasegawa. Sword. AZ Resin

This set contains three brand new and nicely detailed control columns made to fit not just the latest Special Hobby kits. Master patterns 3D created.

1/72 CMK P-40E/Kittyhawk Radio Set (US/RAF). for Special Hobby kit Resin

The set contains complete wireless installation located inside the rear fuselage and its open access panel. Designed to fit the Special Hobby P-40 Warhawk (US type) and Kittyhawk (RAF type) models.

1/72 CMK P-40E/K/M/N - Armament Set for Special Hobby kit Resin

The new Special Hobby P-40 E, K, M and N models will no doubt benefit from the addition of this set which brings the modeller the armament bays for either side of the wing undersurface and also the ammunition magazines which had access panels on the...

1/72 CMK P-40E/K/M and N-1 Seat with Belts for Special Hobby kit Resin

This seat is intended to be used with the new Special Hobby P-40 kits of the E, K, M and N-1 verisons or the earlier released P-40 F,L kits and will no doubt fit other P-40 models too. The master part of the seat was 3D designed and printed for the...

1/72 CMK P-40E. F. K. L. M and N-1 Seat for Special Hobby kit Resin

This new resin cast seat has been tailored to fit the new Special Hobby P-40 kits in the E, K, M and N-1 version and can be used with earlier Special Hobby P-40F and L versions too as well as with other P-40 kits. 3D designed, master parts 3D...

1/72 CMK P-40E Exhausts for Special Hobby kit Resin