1/48 CMK Hawk T.Mk.I Airbrake for Air/Italeri kit Resin

1/48 CMK Harrier T.Mk.12 Conversion set Resin

Conversion set enabling the modeller to use Hasegawa GR.7 Harrier and build it into the two-seat Harrier T.12 version. The set contains resin cast detail parts, etches, vacuum-formed canopy hoods and a sheet of decals for two British options.

1/48 CMK Harrier GR.7/AV-8B Harrier II Flaps Resin

These wing flaps have been tailored to fit the Hasegawa kits of the British Harrier GR.7 and the US AV-8B Harrier II vertical take off and landing (VTOL) jets. The flaps can be attached in the down position, very often seen while the machine standing...

1/48 CMK Harrier GR.7 interior Resin

This set offers a new, detailed resin cast interior made for the Hasegawa’s Harrier GR.7. The new parts are a direct replacement for the kit’s less-detailed item

1/48 CMK Harrier GR.7 Engine Resin

This set enables the modeller to pose the upper fuselage panels open and show to good advantage the partial resin replica of the Harrier’s power plant. Designed for Hasegawa’s Harrier GR.7

1/48 CMK GMC 353 Compresor Le Roi conv.set for TAM Resin

1/48 CMK GMC 353 Clubmobile conv. set for TAM Resin

1/48 CMK Gloster Meteor Mk.8/9 Ejection Seat (M.B. Mk.II) Resin

Ejection seat for the Meteor Mk.8/9 as kitted by Airfix. The seat comes with moulded in harness.

1/48 CMK Gloster Meteor F Mk.8/9 Main Fuel Tank Resin

The Meteor fuselage fuel tank was located behind the cockpit, its covering panel could be removed for servicing. And now you can do the same while building the Airfix kit if you use this resin set. Also contains photo etches.

1/48 CMK Gloster Meteor F Mk.8/9 Gun Bays Resin

This set contains open fuselage Hispano cannon compartments for either the Mk.8 fighter or the Mk.9 reconnaissance Meteors as kitted by Airfix.

1/48 CMK German WW I Refuelling set – All resin kit Resin

1/48 CMK German WW I Fire Pump – All resin kit Resin

1/48 CMK German WW I Bombs and Accessories set for Att Resin

1/48 CMK GBU-24 Paveway III Laser Guided Bomb (2 pcs) Resin

1/48 CMK GBU-12 Paveway II Laser Guided Bomb (2 pcs) Resin

1/48 CMK Folland Gnat T.1 Instrumet panels for Airfix Resin

1/48 CMK Folland Gnat T.1 – Undercarriage set Resin

1/48 CMK Folland Gnat T.1 – Nose Electronics box Resin

1/48 CMK Folland Gnat T.1 – Interior set Resin

1/48 CMK Folland Gnat T.1 – Control surface set Resin

1/48 CMK F-86K Sabre Dog – Wheels Resin

1/48 CMK F-5A Recon Lightning Conversion Set Resin

The P-38 Lightning fighter was the basis for various conversions, many of which were to serve in the photo-reconnaissance role, equipped with a dedicated camera nose section and designated the F-4 and F-5. These airframes were one of the very best recon...

1/48 CMK F4U Corsair wheels with plain disc.diamond de Resin

1/48 CMK F-4J/S Phantom II – Wheels for Hasegawa kit Resin

1/48 CMK F-4B/N Phantom II – Wheels for Hasegawa kit Resin

1/48 CMK F-4B Phantom Wheels (for Tamiya kit) Resin

These detail resin cast wheels offer distinct, sharply executed tyre tread. Designed to fit the new Tamiya F-4B kit.

1/48 CMK F-4B Phantom Ladder (from Tamiya kit) Resin

Resin cast ladder offers much better detail than the original styrene one from the Tamiya kit.

1/48 CMK F-4B Phantom IFR (from Tamiya kit) Resin

The set contains parts portraying the open IFR compartment with the extended probe. Designed for the new Tamiya kit. Brings higher levels of detail than the kit styrene part.

1/48 CMK F-4B Phantom Early Fin Tip Fairing and Rudder (separate) Resin

 The Tamiya kit does not offer the early F-4B style tail fin tip. Our set brings this item along with the separate rudder, which is clearly seen off centre in many photos. The rudder in the kit is an integral part of the fin and cannot be...

1/48 CMK F-4A-1 Recon Lightning Conversion Set Resin

This conversion sets brings the modeller the opportunity to turn their new Tamiya P-38F/G (item no.61120) into the first combat-deployed recon version of this unique aircraft. The set consists of new resin nose parts and clear camera windows  made...

1/48 CMK F-104G/S Starfighter Cockpit + MB.7 Ejection Seat Resin

The F-104 Starfighter became, for a quite long period of time, the most widely used jet fighter aircraft of not only the NATO countries, but with the airforces of many other nations around the world too. The type could be fitted with two types of...

1/48 CMK F-104G/S (European version) – underwing fuel Resin

1/48 CMK F-104G/J Starfighter Cockpit + C2 Ejection Seat Resin

The F-104 Starfighter became, for a quite long period of time, the most widely used jet fighter aircraft of not only the NATO countries, but with the airforces of many other nations around the world too. The type could be fitted with two types of...

1/48 CMK F-104G/J Seat (C-2) Resin

Resin cast C-2 ejection seat for Kinetic´s F-104G/J.

1/48 CMK F-104G/J Engine Resin

Another one of the F-104 sets for the Kinetic model offers the open engine bay as found in the lower mid fuselage. When in open position, the ground crew can check maintain the powerplant. The set consists of only a handful of rather large, but nicely...

1/48 CMK F-104G/J Electronic Box Resin

A whole new range of attractive sets is currently being prepared for the new Kinetic F-104. The first to appear on the market is the front starboard side Electronics Box. Open electronics bay and panel on the forward stbd side, designed for the new...

1/48 CMK F-104C/G/J Wheels Early type Resin

This set contains the early style wheels as seen on the F-104G/J and is meant to be used with the Kinetic model – which contains nice set of wheels, but halved. Our wheels come as one part each and bring much nicer level of detail  of...

1/48 CMK F-104C Wheels Resin

Detail wheels for Kinetic F-104C kit.

1/48 CMK F-104 G/S Seat (M.-B. Mk.7) Resin

Resin cast Martin - Baker Mk.7 ejection seat for Kinetic´s F-104G/S.

1/48 CMK F 104 Starfighter Port Side Cannon Installation Resin

The F-104 G/Js were fitted with 20mm Vulcan rotary cannon. This detail set brings the cannon compartment showing the assembly of the six barrels. The set contains set of photo etches. Designed for Kitetic kits.

1/48 CMK ESK 2000 B German WWII Gun Camera Resin

German gun camera mount externally on the airframe during fighter pilots trainig. It was usually used on the Bf 109 and other single engined types attached either to the wing or fuselage. In some other planes such as the Bf 110 it was seen fitted...

1/48 CMK Ejection seats VS-1 for Aero L-39C/ZA 2pcs Resin

1/48 CMK EADS GAF Telelens Recce Pod Resin

1/48 CMK EADS GAF Recce Pod Resin

1/48 CMK Dornier Do 335B Wheels for TAM Resin

1/48 CMK DH.82 Tiger Moth Mainwheels and Tailskid w/Wheel Resin

The resin cast main undercarriage post-war Tiger Moth wheels feature finely rendered and crisp detail as well as the manufacturer’s logo. On top of that all, the resin set also brings three styles of the wheel hubs, both on the outboard side...

1/48 CMK DH.82 Tiger Moth Mainwheels and Tailskid Resin

The resin cast main undercarriage wheels feature finely rendered and crisp detail as well as the manufacturer’s logo. On top of that all, the resin set also brings three styles of the wheel hubs, both on the outboard side of the wheel and the...

1/48 CMK DH.82 Tiger Moth Luggage Box Resin

The open luggage compartment in the fuselage relates closely to Cockpit set no.CMK4407. It can be as well used alone, though. Not only do the finely detailed resin parts portray the fuselage internal structure, they also bring a superb-looking...

1/48 CMK DH.82 Tiger Moth Exterior Set Resin

To bring the appearance and level of detail of the Airfix’s DH.82 Tiger Moth a great deal higher, why not use this bunch of resin parts which simply replace the original styrene items of the kit, as they, sadly, do not possess the crisp detail...

1/48 CMK DH.82 Tiger Moth Control Surfaces Resin

The new DH.82 Tiger Moth kit as made by Airfix does not have the control surfaces as separate parts. This set mends the issue and also brings nicer levels of detail to the surfaces.

1/48 CMK DH.82 Tiger Moth Cockpit Entry Hatches (4pcs. open) Resin

New cockpit hatches which offer much more detail than those of the new Tiger Moth model kit. The Tiger Moth pilots entered the cockpit from the port side or if the need be opened the doors on both sides. The Airfix model offers the doors open only...

1/48 CMK DH.82 Tiger Moth Cockpit Correction Set Resin

This correction set brings nice level of detail and has been designed to fit the new Airfix’s DH.82 Tiger Moth kit. Besides being better at details, it also corrects various shape flaws of the kit, namely in the cockpit where the floor and the...