1/72 ICM Type G4 Partisanenwagen with MG 34 Plastic Model Kit

The three-axle passenger car G4 was designed by Daimler-Benz in 1934 and produced until 1939. This heavy six-seater SUV with an eight-cylinder engine with a capacity of 100 (later 110) hp. With. was developed for high-ranking officials of the Third...

1/35 ICM Laffly V15T with Hotchkiss machine gun Plastic Model Kit

The Laffly V15T all-wheel drive army vehicle was created in 1938, and in 1939 it began to enter service with the French army. It was used for various tasks, but at first its main purpose was towing the 25 mm Modèle 1934 Hotchkiss anti-tank gun...

1/35 ICM G7117 US Military Truck Plastic Model Kit

The G7117 Army two-axle off-road vehicle was a variant of the G7100 series truck launched by General Motors in the fall of 1941. It was a four-wheel drive vehicle with a payload capacity of 1.5 tons, with a metal cab and a mechanically driven winch from...

1/35 ICM Battle of France Spring 1940 Diorama Plastic Model Kit

Starting on May 10, 1940, Operation Gelb, Wehrmacht formations invaded the territory of Holland, Belgium and Luxembourg. The French commander-in-chief, General Gamelin, ordered the French army to engage in battle with units and subunits of the German...

1/35 ICM WWII 10.5cm Geschutzwagen German Self-Propelled Howitzer

10.5cm leFH 16(Sf) auf Geschutzwagen FCM36 (f) WWII German self-propelled howitzer This self-propelled unit was created as an artillery support vehicle. The captured French FCM 36 tank became the base for it, and the German 105-mm leFH 16 howitzer was...

1/72 Master Model Japanese Type 95 Ha-Go light tank - Tracks - 3D printed (for IBG kit)

The set includes3D printed tracks. Designed to be used with IBG model kit Simply replace original plastic tracks.

1/72 Master Model Japanese Type 95 Ha-Go light tank - 37mm Type 94 gun barrels with resin mount (for IBG kit)

Japanese Type 95 Ha-Go light tank - 37mm Type 94 gun barrels with resin mount (for IBG kit)

1/35 Master Model M18 Hellcat - M1A1 76,2mm gun barrel (for Tamiya kit)

Designed to be used with Tamiya model kit The set includes turned aluminum gun barrel Simply replace original plastic part according the instruction.

1/35 Master Model M3 Lee/Grant - 75mm M2 L/31 (short) & 37mm M6 gun barrels (for I Love Kit model)

Designed to be used with I Love Kit model with short 75mm M2 gun The set includes turned aluminum, brass and PE parts Simply replace original plastic parts according the instruction.

1/35 Master Model PzKpfw VI Tiger I - 88mm KwK36 L/56 gun barrel – LATE muzzle break

The set includes turned aluminum and brass parts, 3D printed resin muzzle break. Simply replace original plastic parts according the instruction.

1/35 Master Model PzKpfw VI Tiger I - 88mm KwK36 L/56 gun barrel – EARLY muzzle break

The set includes turned aluminum and brass parts, 3D printed resin muzzle break. Simply replace original plastic parts according the instruction.

1/35 Special Hobby Panhard 178B 47 mm Gun Late Turret

The French Panhard 178 armoured vehicle, fitted with a 25mm cannon, was one of the best pre-war AFVs in its category. This was also the reason for the Wehmacht to have put these captured vehicles to use. When France was liberated in 1944, the production...

1/35 AFV Club Centurion Hush Puppy Quick Assembly Track Links

1/35 AFV Club US Army M110 Self Propelled Howitzer Plastic Model Kit

Completely new tooling M110 Model Markings for U.S. Army in Vietnam War and Europe service A simple driver’s station interior included Movable ‘Loader and Rammer’ feed tray and traversable elevation arm in superb details. Superbly...

1/35 Artwox 8.8Cm Pak43 Waffentrager

For Dragon 6728

1/48 Artwox Photo Etch Jagdtiger Engine Grill

For Tamiya 32569

1/48 Artwox Photo Etch King Tiger Engine Grill (Armor plate version)

For Tamiya 32536

1/48 Artwox Photo Etch King Tiger Engine Grill Porsche Turret

For Tamiya 32539

1/48 Artwox Photo Etch King Tiger Engine Grill Production Turret

For Tamiya 32536

1/48 Artwox Photo Etch German Panzerjager Jagdtiger

For Tamiya 32569

1/48 Artwox Photo Etch German King Tiger Porsche Turret

For Tamiya 32539

1/48 Artwox Photo Etch German King Tiger Production Turret

For Tamiya 32536

1/72 Master Box British Armoured Car, Austin, MK IV, WW I Era

1/72 Master Box British Armoured Car, Austin, MK III, WW I Era

1/35 Tamiya Russian KV-2 Heavy Tank

This 1/35 scale assembly kit recreates the Russian Heavy Tank KV-2, a heavier variant of the KV-1 (Item 35372). The Russian Heavy Tank KV-2 was developed and produced at the same time as the KV-1 chassis, but it incorporated a massive, boxy turret...

1/35 Hobby Boss Sd.Kfz.186 Jagdtiger Porsche Production

Jagdtiger's (Hunting Tiger) development started in February of 1943 and on October 20th of 1943, wooden mock-up was presented to Adolf Hitler. Jagdtiger's role was to support infantry and combat armoured vehicles at long ranges. Two prototypes, one with...

1/35 Trumpeter L4500A mit 5cm Flak 41 II Plastic Kit

1/35 Trumpeter M984A2 HEMTT Wrecker Recovery Truck Model Kit

The HEMTT M984 is a Wrecker, 8 x 8, heavy expanded mobility tactical truck wrecker, heavy duty crane and winch. It provides heavy wheeled recovery and crane recover/tow/maintenance lift assistance) to 10-ton and lighter tactical wheeled vehicles. It's...

1/72 Yahu Models WW2 seatbelts Japan ARMY Seatbelts

1/35 Yahu Models Chevrolet G506 family - Instrument Panel

1/35 Yahu Models Sd.Kfz 251 - Instrument Panel

1/35 Yahu Models Scammell Pioneer Upgrade

For Thunder Models or IBG

1/35 Yahu Models CASE VAI Tractor - Instrument Panel

1/72 Master Model Polish light tank 7TP - 37mm Bofors wz.36 gun barrel and signal horn

Fits all 7TP 1:72 kits The set includes turned brass and PE parts We advise soldering to join metal parts together To join metal parts with plastic use Cyanoacrylate adhesives.

1/72 Master Model 20mm Oerlikon gun barrels (2pcs) - used on Crusader AA

The set includes turned brass barrels, steel springs and PE parts Oerlikon 20mm was used as an anti-aircraft weapon on Crusader Mk.III AA It is very simple to use in Your model, and makes it extremely realistic. Simply replace original plastic barrels...

1/72 Master Model British QF 6-pdr (57mm) - version Mk.V L/50 (long) + Besa MG tips - for Crusader Mk.III, Churchill Mk.III/IV, Valentine Mk.VIII/IX

The set includes turned brass barrels British QF 6-pdr was widely used in many tanks and other AFV: Crusader Mk.III, Valentine Mk.VIII/IX, Churchill Mk.III/IV, early version of Centaur and Crusader AEC Armoured Car Mk.II It is very simple to use in Your...

1/72 Master Model British QF 6-pdr (57mm) - version Mk.III L/43 (short) + Besa MG tips - for Crusader Mk.III, Churchill Mk.III/IV, Valentine Mk.VIII/IX

The set includes turned brass barrels British QF 6-pdr was widely used in many tanks and other AFV: Crusader Mk.III, Valentine Mk.VIII/IX, Churchill Mk.III/IV, early version of Centaur and Crusader AEC Armoured Car Mk.II It is very simple to use in Your...

1/72 Master Model British QF 2-pdr (40mm) - version Mk.X (step in barrel) + Besa MG tips - for Crusader Mk.I/II, Valentine, Matilda II, and other AFV

The set includes turned brass barrels British QF 2-pdr was widely used in many tanks and other AFV: Crusaders Mk.I/II, Valentine Mk.I-VI, Matilda II, Cruiser Mk. I-IV, MKVII Tetrach, Covenanter, AC1 Sentinel. Daimler, AEC Mk.I, Coventry Mk.I,...

1/72 Master Model British QF 2-pdr (40mm) - version Mk.IX (smooth barrel) + Besa MG tips - for Crusader Mk.I/II, early Valentine, Matilda II, and other AFV

The set includes turned brass barrels British QF 2-pdr was widely used in many tanks and other AFV: Crusaders Mk.I/II, Valentine Mk.I-VI, Matilda II, Cruiser Mk. I-IV, MKVII Tetrach, Covenanter, AC1 Sentinel. Daimler, AEC Mk.I, Coventry Mk.I,...

1/72 Master Model Browning M2 (Heavy Barrel) .50 caliber (12.7mm) - gun barrels (2pcs)

The set includes turned brass barrels with drilled cooling jackets Used on most of the Alied WWII and modern tanks It is very simple to use in Your model, and makes it extremely realistic. Simply replace original plastic barrels. Insert the metal barrel...

1/72 Master Model Browning M1919 .30 cal machine gun barrels (2pcs)

The set includes turned brass barrels with drilled cooling jackets Used on most of the Alied WWII tanks It is very simple to use in Your model, and makes it extremely realistic. Simply replace original plastic barrels. Insert the metal barrel using...

1/35 Master Model M3 Lee (late production) - 75mm M3 L/40 (long) & 37mm M6 gun barrels (for MiniArt kit)

Suiltable for MiniArt kit with long 75mm M3 gun The set includes turned aluminum, brass and PE parts Simply replace original plastic parts according the instruction.

1/35 Master Model M3 Lee (late production) - 75mm M3 L/40 (long) & 37mm M6 gun barrels (for Takom kit)

Suiltable for Takom kit with long 75mm M3 gun The set includes turned aluminum, brass and PE parts Simply replace original plastic parts according the instruction.

1/35 Master Model M3 Lee/Grant - 75mm M2 L/31 (short) & 37mm M6 gun barrels (for MiniArt kit)

Suiltable for MiniArt kit with short 75mm M2 gun The set includes turned aluminum, brass and PE parts Simply replace original plastic parts according the instruction.

1/35 Master Model M3 Lee/Grant - 75mm M2 L/31 (short) & 37mm M6 gun barrels (for Takom kit)

Suiltable for Takom kit with short 75mm M2 gun The set includes turned aluminum, brass and PE parts Simply replace original plastic parts according the instruction.

1/35 Master Model US 37mm M6 gun barrel - used on many tanks and armored cars (Stuart, Grant/Lee, Locust, M6, Greyhound, Staghound and more)

Used on many Alied tanks and armored cars (Stuart, Grant/Lee, Locust, M6, Greyhound, Staghound and more) The set includes turned aluminum, brass and PE parts.

1/35 Master Model MG-34 - German machine gun barrel tips (turret mount) (2pcs)

The set includes turned brass barrels Used on most of the German WWII tanks It is very simple to use in Your model, and makes it extremely realistic. Simply replace original plastic barrels. Insert the metal barrel using Cyanoacrylate adhesives.

1/35 Master Model MG-34 "Panzerlauf" - German machine gun - armored version for tanks - full length gun barrels (2pcs)

The set includes turned brass barrels Used on most of the German WWII tanks It is very simple to use in Your model, and makes it extremely realistic. Simply replace original plastic barrels. Insert the metal barrel using Cyanoacrylate adhesives.

1/35 Master Model MG-34/MG-42 (7.92mm) - cartridges (25pcs)

The set includes turned brass cartridges (25pcs).

1/35 Master Model MG-34/MG-42 (7.92mm) - empty shells (25pcs)

The set includes turned brass shells (25pcs).  

1/35 Master Model MG-42 - German Machine Gun (7.92mm) - complete gun incl. brass, resin and PE parts (1pc)

The set includes unassembled complete 1/35 replica of MG-42 machinegun. It contains turned brass gun barrel, 3D printed cooling jacket, casted resin and photoetched parts.

1/35 Master Model M1919 Browning .30 caliber (7.62mm) - cartridges (25pcs)

The set includes turned brass cartridges (25pcs).