1/35 ICM Laffly V15T with Hotchkiss machine gun Plastic Model Kit

The Laffly V15T all-wheel drive army vehicle was created in 1938, and in 1939 it began to enter service with the French army. It was used for various tasks, but at first its main purpose was towing the 25 mm Modèle 1934 Hotchkiss anti-tank gun...

1/35 ICM G7117 US Military Truck Plastic Model Kit

The G7117 Army two-axle off-road vehicle was a variant of the G7100 series truck launched by General Motors in the fall of 1941. It was a four-wheel drive vehicle with a payload capacity of 1.5 tons, with a metal cab and a mechanically driven winch from...

1/35 ICM Battle of France Spring 1940 Diorama Plastic Model Kit

Starting on May 10, 1940, Operation Gelb, Wehrmacht formations invaded the territory of Holland, Belgium and Luxembourg. The French commander-in-chief, General Gamelin, ordered the French army to engage in battle with units and subunits of the German...

1/35 ICM WWII 10.5cm Geschutzwagen German Self-Propelled Howitzer

10.5cm leFH 16(Sf) auf Geschutzwagen FCM36 (f) WWII German self-propelled howitzer This self-propelled unit was created as an artillery support vehicle. The captured French FCM 36 tank became the base for it, and the German 105-mm leFH 16 howitzer was...

1/35 Master Model M18 Hellcat - M1A1 76,2mm gun barrel (for Tamiya kit)

Designed to be used with Tamiya model kit The set includes turned aluminum gun barrel Simply replace original plastic part according the instruction.

1/35 Master Model M3 Lee/Grant - 75mm M2 L/31 (short) & 37mm M6 gun barrels (for I Love Kit model)

Designed to be used with I Love Kit model with short 75mm M2 gun The set includes turned aluminum, brass and PE parts Simply replace original plastic parts according the instruction.

1/35 Master Model PzKpfw VI Tiger I - 88mm KwK36 L/56 gun barrel – LATE muzzle break

The set includes turned aluminum and brass parts, 3D printed resin muzzle break. Simply replace original plastic parts according the instruction.

1/35 Master Model PzKpfw VI Tiger I - 88mm KwK36 L/56 gun barrel – EARLY muzzle break

The set includes turned aluminum and brass parts, 3D printed resin muzzle break. Simply replace original plastic parts according the instruction.

1/35 Special Hobby Panhard 178B 47 mm Gun Late Turret

The French Panhard 178 armoured vehicle, fitted with a 25mm cannon, was one of the best pre-war AFVs in its category. This was also the reason for the Wehmacht to have put these captured vehicles to use. When France was liberated in 1944, the production...

1/35 AFV Club Centurion Hush Puppy Quick Assembly Track Links

1/35 AFV Club US Army M110 Self Propelled Howitzer Plastic Model Kit

Completely new tooling M110 Model Markings for U.S. Army in Vietnam War and Europe service A simple driver’s station interior included Movable ‘Loader and Rammer’ feed tray and traversable elevation arm in superb details. Superbly...

1/35 Artwox 8.8Cm Pak43 Waffentrager

For Dragon 6728

1/35 Tamiya Russian KV-2 Heavy Tank

This 1/35 scale assembly kit recreates the Russian Heavy Tank KV-2, a heavier variant of the KV-1 (Item 35372). The Russian Heavy Tank KV-2 was developed and produced at the same time as the KV-1 chassis, but it incorporated a massive, boxy turret...

1/35 Hobby Boss Sd.Kfz.186 Jagdtiger Porsche Production

Jagdtiger's (Hunting Tiger) development started in February of 1943 and on October 20th of 1943, wooden mock-up was presented to Adolf Hitler. Jagdtiger's role was to support infantry and combat armoured vehicles at long ranges. Two prototypes, one with...

1/35 Trumpeter L4500A mit 5cm Flak 41 II Plastic Kit

1/35 Trumpeter M984A2 HEMTT Wrecker Recovery Truck Model Kit

The HEMTT M984 is a Wrecker, 8 x 8, heavy expanded mobility tactical truck wrecker, heavy duty crane and winch. It provides heavy wheeled recovery and crane recover/tow/maintenance lift assistance) to 10-ton and lighter tactical wheeled vehicles. It's...

1/35 Yahu Models Scammell Pioneer Upgrade

For Thunder Models or IBG

1/35 Yahu Models CASE VAI Tractor - Instrument Panel

1/35 Master Model M3 Lee (late production) - 75mm M3 L/40 (long) & 37mm M6 gun barrels (for MiniArt kit)

Suiltable for MiniArt kit with long 75mm M3 gun The set includes turned aluminum, brass and PE parts Simply replace original plastic parts according the instruction.

1/35 Master Model M3 Lee (late production) - 75mm M3 L/40 (long) & 37mm M6 gun barrels (for Takom kit)

Suiltable for Takom kit with long 75mm M3 gun The set includes turned aluminum, brass and PE parts Simply replace original plastic parts according the instruction.

1/35 Master Model M3 Lee/Grant - 75mm M2 L/31 (short) & 37mm M6 gun barrels (for MiniArt kit)

Suiltable for MiniArt kit with short 75mm M2 gun The set includes turned aluminum, brass and PE parts Simply replace original plastic parts according the instruction.

1/35 Master Model M3 Lee/Grant - 75mm M2 L/31 (short) & 37mm M6 gun barrels (for Takom kit)

Suiltable for Takom kit with short 75mm M2 gun The set includes turned aluminum, brass and PE parts Simply replace original plastic parts according the instruction.

1/35 Master Model US 37mm M6 gun barrel - used on many tanks and armored cars (Stuart, Grant/Lee, Locust, M6, Greyhound, Staghound and more)

Used on many Alied tanks and armored cars (Stuart, Grant/Lee, Locust, M6, Greyhound, Staghound and more) The set includes turned aluminum, brass and PE parts.

1/35 Master Model MG-34 - German machine gun barrel tips (turret mount) (2pcs)

The set includes turned brass barrels Used on most of the German WWII tanks It is very simple to use in Your model, and makes it extremely realistic. Simply replace original plastic barrels. Insert the metal barrel using Cyanoacrylate adhesives.

1/35 Master Model MG-34 "Panzerlauf" - German machine gun - armored version for tanks - full length gun barrels (2pcs)

The set includes turned brass barrels Used on most of the German WWII tanks It is very simple to use in Your model, and makes it extremely realistic. Simply replace original plastic barrels. Insert the metal barrel using Cyanoacrylate adhesives.

1/35 Master Model MG-34/MG-42 (7.92mm) - cartridges (25pcs)

The set includes turned brass cartridges (25pcs).

1/35 Master Model MG-34/MG-42 (7.92mm) - empty shells (25pcs)

The set includes turned brass shells (25pcs).  

1/35 Master Model MG-42 - German Machine Gun (7.92mm) - complete gun incl. brass, resin and PE parts (1pc)

The set includes unassembled complete 1/35 replica of MG-42 machinegun. It contains turned brass gun barrel, 3D printed cooling jacket, casted resin and photoetched parts.

1/35 Master Model M1919 Browning .30 caliber (7.62mm) - cartridges (25pcs)

The set includes turned brass cartridges (25pcs).

1/35 Master Model M1919 Browning .30 caliber (7.62mm) - empty shells (25pcs)

The set includes turned brass shells (25pcs).

1/35 Master Model Browning .50 caliber (12.7mm) - cartridges (25pcs)

The set includes turned brass cartridges (25pcs).

1/35 Master Model Browning .50 caliber (12.7mm) - empty shells (25pcs)

The set includes turned brass shells (25pcs).

1/35 Master Model German 2cm ammunition (cal. 20x138B) for Flak 30/38, KwK 30/38 - shells (15pcs) and 3 types of projectiles (5pcs of each type)

The set includes turned brass shells (15pcs) and 3 types of projectiles (5pcs of each type).

1/35 Master Model German 2cm ammunition (cal. 20x138B) for Flak 30/38, KwK 30/38 - empty shells (25pcs)

The set includes turned brass shells (25pcs).

1/35 Master Model Antenna AT-1011/U HF with Tilt Adapter RF-1980-AT-001 - used on KTO Rosomak and other vehicles (1pc)

The set includes turned brass antenna, resin nad PE parts Set includes Tilt Adapter RF-1980-AT-001 It is very simple to use in Your model, and makes it extremely realistic. Insert the metal parts using Cyanoacrylate adhesives. Other MASTER sets for...

1/35 Master Model Antenna AT-1011/U HF - used on KTO Rosomak and other vehicles (1pc)

The set includes turned brass antenna and resin parts It is very simple to use in Your model, and makes it extremely realistic. Insert the metal parts using Cyanoacrylate adhesives. Other MASTER sets for KTO...

1/35 Master Model KTO Rosomak - smoke grenade launcher

The set includes turned brass elements and resin elements It is very simple to use in Your model, and makes it extremely realistic. Insert the metal parts using Cyanoacrylate adhesives. Other MASTER sets for KTO...

1/35 Master Model Antenna Comrod VHF3088VM - used on KTO Rosomak and other vehicles (1pc) - TILTED version

The set includes turned brass antenna, brass elements, twine, PE parts and resin elements It is very simple to use in Your model, and makes it extremely realistic. Insert the metal parts using Cyanoacrylate adhesives. Other MASTER sets for KTO...

1/35 Master Model Antenna Comrod VHF3088VM - used on KTO Rosomak and other vehicles (1pc) - STRAIGHT version

The set includes turned brass antenna and resin elements It is very simple to use in Your model, and makes it extremely realistic. Insert the metal parts using Cyanoacrylate adhesives. Other MASTER sets for KTO...

1/35 Master Model ATK Mk 44 (Bushmaster II) 30mm gun barrel - used on KTO Rosomak and other vehicles (1pc)

The set includes turned brass part and resin muzzle break It is very simple to use in Your models. Insert the metal parts using Cyanoacrylate adhesives.

1/35 Master Model KPVT (tankovyi) - Russian 14,5mm heavy machine gun - version for armoured vehicles (BTR-60PB/70/80, BRDM-2 and other) (1pcs)

The set includes turned brass parts, drilled round cooling jacket, photoetched part and resin element. In addition to national T-10 tanks, BTR-60, BTR-70, and BTR-80 APCs, and BRDM-2 reconnaissance armoured vehicles the KPVT was mounted on armoured...

1/35 Master Model KPV - Russian 14,5mm heavy machine gun - round cooling holes - used on ZPU-1/2/4 anti-aircraft systems (1pcs)

The set includes turned brass parts, drilled round cooling jacket, photoetched part and resin element. Used in ZPU-1/2/4 anti-aircraft systems. It is very simple to use in Your models. Insert the metal parts using Cyanoacrylate adhesives. Other versions...

1/35 Master Model KPV - Russian 14,5mm heavy machine gun - elongated cooling slots - used on ZPU-1/2/4 anti-aircraft systems (1pcs)

The set includes turned brass parts, drilled elongated cooling jacket, photoetched part and resin element. Used in ZPU-1/2/4 anti-aircraft systems. It is very simple to use in Your models. Insert the metal parts using Cyanoacrylate adhesives. Other...

1/35 Master Model German 2cm L/50 Kw.K. 38 (1pcs)

The set includes turned brass barrel with drilled and slotted flash hider. It is very simple to use in Your model, and makes it extremely realistic. Simply cut off the original plastic barrel and drill a hole in the remaining plastic parts and insert the...

1/35 Master Model German 2cm L/65 Flak 38 gun barrel (1pcs)

The set includes turned brass barrel with drilled and slotted flash hider. It is very simple to use in Your model, and makes it extremely realistic. Simply cut off the original plastic barrel and drill a hole in the remaining plastic parts and insert the...

1/35 Master Model German 2cm L/65 Flak 38 and Flakvierling 38 gun barrels (4pcs)

The set includes turned brass barrels with drilled and slotted flash hiders. It is very simple to use in Your model, and makes it extremely realistic. Simply cut off the original plastic barrel and drill a hole in the remaining plastic parts and insert...

1/35 Master Model Browning M1919 .30 cal machine gun barrels one piece muzzle (cylindrical shape) (2pcs)

The M1919 Browning is a .30 caliber medium machine gun widely used during the 20th century, especially during World War II, the Korean War, and the Vietnam War. The set includes two turned brass barrels with drilled cooling jacket. It is very simple to...

1/35 Master Model Browning M1919 .30 cal machine gun barrels two piece muzzle (conical shape) (2pcs)

The M1919 Browning is a .30 caliber medium machine gun widely used during the 20th century, especially during World War II, the Korean War, and the Vietnam War. The set includes two turned brass barrels with drilled cooling jacket. It is very simple to...

1/35 Master Model ZU-23-2 "Sergey" ammunition - shells (20pcs) and two types of rounds (10pcs of each type)

The set includes twenty turned brass shells, ten OFZ (HEI) brass rounds and ten BZT (API-T) brass rounds.

1/35 Master Model ZU-23-2 "Sergey" - Russian 23 mm anti-aircraft twin-barreled autocannon - turned barrels (2pcs)

The set includes two turned brass barrels with blast tubes. Simply cut off the original plastic barrel and drill a hole in the remaining plastic parts and insert the metal barrel using Cyanoacrylate adhesives.

1/35 Master Model M61 A1 Vulcan - Six-barrelled rotary 20mm cannon - turned barrels with etched barrel clamps

The set includes turned brass barrels and etched barrel clamps. It is very simple to use in Your model, and makes it extremely realistic. Insert the metal parts using Cyanoacrylate adhesives.

1/35 HobbyBoss Russian ZIS-5B Truck Plastic Model Kit

The ZIS-5 was a 4x2 Soviet truck produced by MoscowZIS factory from October 1933 on.ZIS-5 became an excellent vehicle, the engine could work even with the worst fuel, and the car mechanisms were simple, durable and insensible on brutal service. The car...