1/700 Starfighter Decals - Post War Essex Class Carrier Markings

Two Sheet set. Markings for use with any 1/700-720 scale Post war Essex class CV. Markings include Aircraft and Armament Elevators, Ship names, Deck striping, Pennant Numbers, and a variety of unique markings for various ships. If you look hard, you may...

1/700 White Ensign IJN Doors & Hatches Superset

1/700 Toms Modelworks Titanic compass platform Photo Etch

Complete replacement for the Titanic kit's compass platform including the access ladder. Made of thicker brass materiel for ease of assembly.

1/700 Toms Modelworks railing with netting Photo Etch

3 bar railing with netting on lower 2/3. Used on most US Navy destroyers in WW2. Enough railing for several kits.

1/700 Toms Modelworks Turret catapult Photo Etch

U.S. Navy turret catapult for battleships New York, Texas, Oklahoma, Nevada and Pennsylvania.

1/700 Toms Modelworks US Battelship details Photo Etch

Contains many useful details for interwar US Navy battleships including anchor chain, floatplane dolly, boat racks, boat booms, boat davits, etc. Heavy brass material for ease of use.

1/700 Toms Modelworks County class cruisers Photo Etch

Designed for the Aoshima County class kits of Dorsetshire, Norfolk, Cornwall, and Kent. Any TWO kits can be detailed using this set which includes railings, cranes, catapults, radar antennas and many other parts specific to each kit. Many of these...

1/700 Toms Modelworks Flying off platforms Photo Etch

Flying off platforms for World War 1 Royal Navy battleships and battlecruisers. Usually mounted on superfiring turrets. Also used on US Navy battleships. The set allows for detaching the ramp over the barrels. For use on twin turrets.

1/700 Toms Modelworks vertical ladders Photo Etch

Vertical ladders for use on masts, funnels and superstructure areas.

1/700 Toms Modelworks S class submarines Photo Etch

Brass detail kit to make 2 "S" class submarines - S-28 and S-35. Brass detail set included to make two submarines.

1/700 Toms Modelworks Graf Zeppelin Photo Etch

An extensive set to detail the 1/700 scale Trumpeter Graf Zeppelin or Peter Strasser kits. This set has parts to make the catapults in open configuration, rails including single-bar flight deck rails, catapult trolleys, flight deck wind breaks, and boat...

1/700 Toms Modelworks IJN tankers for Fujimi kits Photo Etch

The set contains parts to help make any of the first twelve ships of this type regardless of which plastic kit you have. The set has catwalk details, new bridge fronts, new bridges, kingpost trusses, funnel caps, refueling crane booms, ladders, rails and...

1/700 Toms Modelworks Illustrious class carriers (WW2) Photo Etch

For the Aoshima HMS Illustrious and HMS Victorious kits but will work perfectly well on the HP resin kits or the old Aoshima kits. Contains parts to detail the kits as built and also as fitted for service with the British Eastern and Pacific Fleets in...

1/700 Toms Modelworks chain-type rails Photo Etch

Chain rails for main decks, pipe rails and canvas covered pipe railing for superstructure decks and platforms. Perfect for pre-dreadnoughts and smaller pre-WW1 ships.

1/700 Toms Modelworks Mikasa Photo Etch

For the 1/700 Hasegawa Mikasa kit. Contains chain and pipe rails as well as rails with canvas dodgers, replacement bridge decks with the correct planking orientation, stern walk with roof, ladders boat racks torpedo net shelves, gun shields and much more.

1/700 Toms Modelworks HMS Hermes crane Photo Etch

Aircraft handling crane for HMS Hermes (95).

1/700 Toms Modelworks HMS Eagle crane Photo Etch

Aircraft handling crane for HP HMS Eagle resin kits.

1/700 Toms Modelworks Saratoga (for the Tamiya kit) Photo Etch

Contains parts for backdating the Saratoga to 1942 and 1943 fits as well as parts for the kit's standard configuration. Contains special rails for the superimposed 5" twin mount platforms, safety nets along the flight deck, perforated catwalks, ladders,...

1/700 Toms Modelworks post-war flotation baskets Photo Etch

Post-War style flotation baskets used on all US carriers from the mid fifties through the sixties. Still aboard museum ships USS Yorktown and USS Hornet. Three sizes are included in the set. Perfect for use on Dragon's Enterprise kit (when it comes out)...

1/700 Toms Modelworks Olympic rails Photo Etch

For the Revell Olympic 1/700 kit in her 1911 fit. Has 5 different styles of rails, separate gates, and special bow rails. Also has ratlines and inclined ladders. This is set 769 with instructions re-mastered for the Olympic. Will work for the Revell...

1/700 Toms Modelworks Olympic details Photo Etch

For the Revell Olympic 1/700 kit. Has all the details you need to enhance this very accurate kit of "Old Reliable" in her 1911 fit - skylights, compass platform legs, vent grills, funnel ladders with whistle platforms, crane booms, Fidley grills, even a...

1/700 Toms Modelworks US Navy flotation baskets Photo Etch

This set has 85 individual floater net baskets in three different sizes for use on all US Navy World War 2 era surface ships. Carriers had different baskets and those are available on set 752.

1/700 Toms Modelworks IJN 25mm guns Photo Etch

Set 773 has 24 single 25mm AA guns with two options for the base of the mounting - round or square. Used on nearly every Imperial Japanese Navy ship later in the war. Made of heavier gauge brass to facilitate a three-dimensional look.

1/700 Toms Modelworks Yamato rails Photo Etch

Yamato and Musashi specialized railing. Included in set 749 Yamato details.

1/700 Toms Modelworks Titanic details Photo Etch

Detail set for the 1/700 Academy Titanic kit. Has all the details of our very popular 1/350 set including skylights, compass platform legs, vent grills, funnel ladders with whistle platforms, crane booms, Fidley grills, even a ship's wheel! Set 781 has...

1/700 Toms Modelworks Titanic Rails Photo Etch

Rail set for the Academy 1/700 scale Titanic kits. Has 5 different styles of rails, separate gates, and special bow rails. Also has ratlines and inclined ladders. Set 782 has directions specifically for the Revell 1/700 Titanic or Olympic kits.

1/700 Toms Modelworks South Dakota class Photo Etch

This set has everything you need to upgrade your South Dakota, Massachusetts Alabama and Indiana Radar for all four ships in various fits from commissioning to decommissioning! Rails, catapults, cranes and funnel caps are all included. Five sheets of...

1/700 Toms Modelworks 40mm twin rails Photo Etch

Set is 10 rails for 40 mm twin mounts as used by the US Navy.

1/700 Toms Modelworks German Naval reels Photo Etch

12 different styles over 100 reels on the set. Reels for destroyers to battleships. See sets 735, 763 for additional supporting sets.

1/700 Toms Modelworks German naval doors Photo Etch

This set contains 8 different door styles both open and closed, port & starboard. Over 100 doors on the set. See sets 735, 764, 765 for additional supporting sets.

1/700 Toms Modelworks IJN doors Photo Etch

The set contains 11 different door styles, some representing both open and closed other just closed, and 2 different deck hatches.

1/700 Toms Modelworks British E class destroyer Photo Etch

Set contains parts for 2 ships and includes davits, rails, ladders, radar antenna, funnel caps, gun details and more.

1/700 Toms Modelworks USS North Carolina & Washington Photo Etch

Cranes, catapults, mid to late-war radars, rails, flotation baskets, 20mm guns and more. Additional useful sets are 753 Naval Doors, 759 deck details & 754 inclined ladders. For backdating either North Carolina or Washington to their 1942 fit, set...

1/700 Toms Modelworks Essex class carrier Photo Etch

This set details the Essex Class Carrier and can be used on early or late war, short hull version or the late war long hull versions. rails. aircraft details, radars, platforms, gun details and a lot more. Additional useful sets are 712 Naval Aircraft,...

1/700 Toms Modelworks IJN reels Photo Etch

This set contains reels that cover ships from Destroyer to Battleships.

1/700 Toms Modelworks Inclined & vertical ladders Photo Etch

Set contains 2 styles of inclined ladders in 4 different lengths plus 2 boarding ladders.

1/700 Toms Modelworks US Naval doors Photo Etch

This set contains both open and closed doors 10 different styles 7 each.

1/700 Toms Modelworks US Carrier flotation baskets Photo Etch

Set contains the style of flotation basket used on US Carriers in WWII.

1/700 Toms Modelworks Prinz Eugen detailing set Photo Etch

Set contains rails, radars, catapult, bracing and more. For the Tamiya or either Trumpeter kit. The radars in this set cover Prinz Eugen's whole career from 1941 to 1945. Also includes detail parts for the Arado float plane. Updated instructions include...

1/700 Toms Modelworks USS Arizona Photo Etch

Set designed for either the Dragon or MiniHobby models, and contains rails, catapults, cranes, flag booms and more. For supporting sets see 753 Naval Doors & 759 deck details.

1/700 Toms Modelworks IJN submarines Photo Etch

Parts to details all 8 subs in the 4 different skywave kits.

1/700 Toms Modelworks Scharnhorst Photo Etch

Part for either ship, rails catapult, cranes radars, platform bracing and more. See sets 763 & 764 for additional German Naval Details.

1/700 Toms Modelworks IJN aircraft wheels and props Photo Etch

Wheels and props for most all the IJN Naval aircraft types.

1/700 Toms Modelworks IJN carrier Zuiho Photo Etch

Set contains rails, platform braces, masts and more. Will detail either Zuiho or Shoho. For additional aircraft see set 744 or for other IJN Carriers see sets 702/703. Supporting sets, 755 IJN Deck Reels, 762 IJN Doors and deck hatches.

1/700 Toms Modelworks US carrier catwalks Photo Etch

Set contains perforated catwalks with rails attached as used on US Carriers.

1/700 Toms Modelworks US Gato class submarine Photo Etch

Set contains rails, radars, prop guards and other parts for two Gato class submarines for either the Hobby Boss or Tamiya/ Pit-Road kits. Also contains details for the IJN No. 13 class Sub Chaser that is part of the Tamiya kit.

1/700 Toms Modelworks HMS Rodney Photo Etch

Set contains parts for either ship, radars, directors, rails and more.

1/700 Toms Modelworks HMS Hood Photo Etch

Set contains parts for the Hood, rails, type 279 and 284 radars, boat davit details, pom-pom detail parts and more for the Trumpeter 1931 and 1941 kits and the Tamiya kit as well as some parts for the "E" class destroyer that comes with some of the...

1/700 Toms Modelworks KGV & PoW Photo Etch

Set contains rails, cranes, radars, gun directors and more.

1/700 Toms Modelworks Bismarck Photo Etch

Set contains relief etched parts, rails, catapults, radars, bracing, hanger doors and more We believe this set contains the only correct catapults currently available for these ships. See sets 763, 764, 765 for additional German Naval Details. Does not...

1/700 Toms Modelworks IJN Sea Plane Tender Photo Etch

Set contains rails, cranes, catapults and aircraft props and more. For Akitsushima, Chogei, Jingei as well as Chitose and Chiyoda. Supporting sets, 755 IJN Deck Reels, 762 IJN Doors and deck hatches.

1/700 Toms Modelworks IJN Battleship Photo Etch

This detail set has been newly updated. All kits (new and old tooling) of the Ise, Nagato & Fuso classes of battleship in World War Two fit are covered. The set has cranes, radars, catapults, rails, searchlight towers and more. It has enough parts to...