1/72 Flying Leathernecks USMC KC-130J Hercules / Harvest Hawk Decals

1/72 Flying Leathernecks Mk-83 1000lb bomb with conical fin (6 bombs)

This set includes six (6) Mk-83 1000lb bombs with conical fins and six (6) each of the following : M904 nose fuzes, Mk-43 TDD and MXU-735 Nose Plugs. The Mk-83 was the weapon of choice for the...

1/72 Flying Leathernecks Mk-83 1000lb bomb with BSU-85 fin (6 bombs)

This set includes six (6) Mk-83 1000lb bombs with BSU-85 fins and six (6) each of the following : M904 nose fuzes, Mk-43 TDD and MXU-735 Nose Plugs. The Mk-83 was the weapon of choice for the USN and...

1/72 Flying Leathernecks Mk-82 500lb bomb with BSU-86 retarded fin thermally protected

This set contains six (6) Mk-82 500lb bombs with thermal protective coating and BSU-86 retarded fins. Also included are six (6) each of the following :  M904 Nose Fuze Mk-43 TDD MXU-735...

1/72 Flying Leathernecks Mk-82 500lb bomb with BSU-86 retarded fin

This set contains six (6) Mk-82 500lb bombs with BSU-86 retarded fins. Also included are six (6) each of the following :  M904 Nose Fuze Mk-43 TDD MXU-735 Solid Nose Plug Bombs come as shown in...

1/72 Flying Leathernecks Mk-82 500lb bomb with BSU-33 fin

This set includes six Mk-82 / BLU-111/B bombs with BSU-33/B tail fins, and six each of the following : M904 nose fuzes, Mk-43 TDD, MXU-735 nose plugs. Accurately reproduced using personal...

1/72 Flying Leathernecks Mk-77 Fire Bombs (6)

This set includes six (6) Mk-77 Fire Bombs. Light sanding to remove print support nibs is necessary on the aft end of the bomb

1/72 Flying Leathernecks Marine Aviation Combat Element Decals

This sheet features markings for eight different Marine Corps aircraft. KC-130F VMGRT-253 Titans - MCAS Cherry Point, NC 2006 F/A-18D VMFA(AW)-121 Green Knights - Operation Desert Storm...

1/72 Flying Leathernecks LAU-7F/A Missile Launcher F/A-18C/D 2008 to present day (4)

Set of four (4) 3D printed launchers The LAU-7F/A was first introduced in 2008, with more widespread use by 2010. This version is used primarily on USMC F/A-18C/D aircraft.

1/72 Flying Leathernecks LAU-7A/A Missile Launcher for USAF F-4 Phantom (4)

Set of four (4) 3D printed launchers In February of 1964, the LAU-7A/A was introduced as a USAF version of the LAU-7/A that incorporated provisions for launching the TDU-11/B Target Rocket. The...

1/72 Flying Leathernecks LAU-7/A-6 Missile Launcher 1988 to present day (4)

Set of four (4) 3D printed launchers In January of 1987, AAC-829 was introduced and by May of 1988, over 6500 launchers had been modified to LAU-7/A-6. Over the course of the next several years,...

1/72 Flying Leathernecks LAU-7/A-4 LAU-7/A-5 1976 to 1987 (4)

Set of four (4) 3D printed launchers In September of 1976, AAC 688 introduced a new dual Fin Retaining Clip for the new AIM-9L Sidewinder, creating the LAU-7/A-4. In June of 1980, AAC-736 was...

1/72 Flying Leathernecks LAU-7/A-1 thru /A-3 Missile Launcher 1969 to 1975

Set of four (4) 3D printed launchers In May of 1969, AAC 545 introduced the Fin Retaining Clip for the AIM-9D/G/H Sidewinder, creating the LAU-7/A-1. In January of 1971, AAC-537-1 introduced the...

1/72 Flying Leathernecks LAU-7/A Missile Launcher 1958 to 1968 (4)

Set of four (4) 3D printed launchers The LAU-7/A was developed in June of 1958 for use on the F4H-1 (F-4B) and designed to be used with the AIM-9B missile. This version was in service until May of...

1/72 Flying Leathernecks LAU-7 missile launcher stencil data Decals

Data Markings for twelve (12) LAU-7 missile launchers. Water slide decals printed my Microscale

1/72 Flying Leathernecks GBU-38 500lb JDAM (6)

Set includes six (6) Mk-82/BLU-111 bombs with KMU-572 tail assemblies and nose strakes attached. Also included are six (6) DSU-33 proximity fuzes, six (6) MXU-735 solid nose plugs and six (6)...

1/72 Flying Leathernecks GBU-32(V)2/B 1000lb JDAM (6)

Set includes six (6) Mk-83/BLU-110 bombs with KMU-559 guidance kit and tail assemblies attached. Also included are six (6) each of the following : DSU-33 proximity fuzes, MXU-735...

1/72 Flying Leathernecks F-4E/G/S/J(UK) Belly Strap

Designed to be used with the Hasegawa kits, this is a simple to use and inexpensive way to replicate the strap applied to the bottom of the fuselage. Should also work with Fujimi and Revell Phantom...

1/72 Flying Leathernecks F-16C Fuselage plates for Revell/Tamiya/Hasegawa

Redesigned set includes the plates added to the upper wing and forward nose section. Parts adjusted to accurately fit all 1/72 F-16 kits.

1/72 Flying Leathernecks F/A-18C/D Pylons

Set FL172-2001 contains four correct SUU-63C/A wing pylons and one correct SUU-62C/A centerline pylon for the F/A-18A++, C and D. These pylons are correct for F/A-18C and D aircraft with BuNo's...

1/72 Flying Leathernecks F/A-18A/B Pylons

Set FL172-2000 contains four correct SUU-63/A wing pylons and one correct SUU-62/A centerline pylon for the F/A-18A and B. They not only correct the shape of the kit pylons, they provide details...

1/72 Flying Leathernecks F/A-18A Tail plates for Academy

This item includes 2 sets of stiffening plates applied to the left side of each vertical tail on F/A-18A/A+ aircraft in use by the USN, USMC, Canada, Australia and Spain. Made of self adhesive vinyl,...

1/72 Flying Leathernecks AH-1Z/UH-1Y FMV Tail Mod for Dream Model

The FMV Mod fitted to the tail boom of the AH-1Z and UH-1Y allows grounds units to see what the aircrew sees through the aircraft's FLIR. Designed for the Dream Model AH-1Z kit

1/72 Flying Leathernecks AH-1Z TSS Turret for Dream Model kit

This set includes six (6) Mk-83 1000lb bombs with BSU-85 fins and six (6) each of the following : M904 nose fuzes, Mk-43 TDD and MXU-735 Nose Plugs. The Mk-83 was the weapon of choice for the USN and...

1/48 Flying Leathernecks UH-34J H-34G.III Canopy wheel mask for Italeri

1/48 Flying Leathernecks UH-34D canopy mask for Gallery

1/48 Flying Leathernecks UH-1Y SATCOM Antenna

This is a two piece 3D printed set of the SATCOM antenna mounted to the top of the main rotor mast on the UH-1Y Helicopter. Designed for the Kittyhawk kit. Simply glue the antenna to the top center...

1/48 Flying Leathernecks UH-1Y Marine Skid Kid Yankees Decals

5.5 x 8.5 inch sheet and designed for the Kittyhawk 1/48 UH-1Y.  Features markings for 11 aircraft, including 3 from HMLA-267 while attached to the 11th MEU in 2019.  Printed by Microscale

1/48 Flying Leathernecks UH-1Y canopy mask for Kittyhawk

1/48 Flying Leathernecks UH-1N Tail Boom Access Panels

The access panels in the kit are the wrong shape and almost completely removed when the seams are filled and sanded smooth. Simply cut the panels from the runner and glue to the boom. Placement guide...

1/48 Flying Leathernecks UH-1N canopy mask for Kittyhawk

1/48 Flying Leathernecks UH-1N canopy mask for Italeri

1/48 Flying Leathernecks TA-4J canopy/wheel mask for Hasegawa

Designed for the Hasegawa series of kits, enough for one aircraft.

1/48 Flying Leathernecks T-45C canopy wheel mask for Kinetic

1/48 Flying Leathernecks T-45C Canopy Det Cord for Kinetic/Wolfpack Kit

This set contains pre-cut self adhesive vinyl Det Cords for the forward and aft canopies. Designed to fit the Kinetic / Wolfpack Design kits. Transfer tape included and pre-attached. 

1/48 Flying Leathernecks S-3A/B ES-3A canopy wheel mask for AMT/ESCI/Italeri

1/48 Flying Leathernecks OV-10A Canopy/Wheel Mask for ICM

Simple to use pre-cut vinyl canopy and wheel mask for the ICM OV-10A and OV-10D kits.

1/48 Flying Leathernecks OA-4M canopy/wheel mask for Monogram

Designed for the Monogram kit, enough for one aircraft.

1/48 Flying Leathernecks MV-22B Tilt Rotor Tango Decals

5.5 x 8.5 inch sheet and designed for the Italeri / Hobbyboss 1/48 V-22. Features markings for six aircraft.

1/48 Flying Leathernecks MV-22B Canopy wheel mask for Italeri

1/48 Flying Leathernecks MV-22B Canopy wheel mask for Hobby Boss

Canopy and Wheel mask designed for the Hobbyboss 1/48 MV-22 kit.

1/48 Flying Leathernecks Mk-84 2000lb bomb with conical fins (Thermally Protected)

1/48 Flying Leathernecks Mk-84 2000lb bomb with conical fins

1/48 Flying Leathernecks Mk-83 1000lb Bomb with Conical Fins

This set includes four (4) Mk-83 1000lb bombs, four (4) Conical fins and four (4) each of the following : M904 nose fuzes, Mk-43 TDD and MXU-735 Nose Plugs. The Mk-83 was the weapon of choice for the...

1/48 Flying Leathernecks Mk-83 1000lb Bomb with BSU-85 Fins

This set includes four (4) MK-83 bombs, four (4) BSU-85 fins and four (4) each of the following : M904 Nose Fuze. Mk-43 TDD (target detecting device). MXU-735 nose plug. This bomb and fin...

1/48 Flying Leathernecks Mk-83 / BLU-110A/B with Conical Fin - Thermally Protected

This set includes four (4) Mk-83 1000lb bombs with the Thermal Protective coating, four (4) Conical fins and four (4) each of the following : M904 nose fuzes, Mk-43 TDD and MXU-735 Nose Plugs. The...

1/48 Flying Leathernecks Mk-83 / BLU-110A/B with BSU-85 Fin - Thermally Protected

This set includes four (4) Mk-83 1000lb bombs with the Thermal Protective coating, four (4) BSU-85 fins and four (4) each of the following : M904 nose fuzes, Mk-43 TDD and MXU-735 Nose Plugs. The...

1/48 Flying Leathernecks Mk-82 with BSU-86 retarded fin

This set contains six (6) Mk-82 500lb bombs with BSU-86 retarded fins. Also included are six (6) each of the following :  M904 Nose Fuze. Mk-43 TDD. MXU-735 Solid Nose Plug. Bombs come as shown...

1/48 Flying Leathernecks Mk-82 thermally protected with BSU-86 retarded fin

This set contains six (6) Mk-82 500lb bombs with thermal protective coating and BSU-86 retarded fins. Also included are six (6) each of the following :  M904 Nose Fuze. Mk-43 TDD. MXU-735...

1/48 Flying Leathernecks Mk-82 500lb bomb with conical fins (Vietnam to Desert Storm) TP

1/48 Flying Leathernecks Mk-82 500lb bomb with conical fins (Vietnam to Desert Storm)

This set includes the following : Six (6) Mk-82 500lb bombs with Conical Fins. Six (6) M904 Nose Fuzes. Six (6) Ogive Nose Plugs. Six (6) MXU-735 Solid Nose Plugs. Six (6) Mk-43 TDD Proximity Fuzes...

1/48 Flying Leathernecks Mk-82 / BLU-111A/B with BSU-33 Fin - Thermally Protected

This set includes six Thermally Protected Mk-82 / BLU-111/B bombs with BSU-33/B tail fins, and six each of the following : M904 nose fuzes, Mk-43 TDD, MXU-735 nose plugs. Accurately reproduced using...